A forum dedicated to Hydrofoil riders
-
edt
- Very Frequent Poster
- Posts: 7316
- Joined: Fri Jul 16, 2010 6:27 am
- Kiting since: 2010
- Local Beach: Michigan
- Gear: ride hard, no regrets
-
Has thanked:
530 times
-
Been thanked:
664 times
Postby edt » Wed Sep 19, 2018 8:26 pm
So I know most of the base plates are 90mm and if you have a track system you can swap the entire foil kit, mast, fuselage and wings over from one board to a different board.
But today I heard that the Naish and Liquid Force masts are also compatible. I find this a little hard to believe, as the mast sizes and bolt places should be all different. Anyway, is this just a bad rumor or are some of the masts actually compatible between brands? I have a liquid force setup so I can measure that but no access to a Naish right now. If the masts are compatible that makes shopping for a short mast and not having to tap new holes easier.
-
RagingGrandpa
- Medium Poster
- Posts: 97
- Joined: Fri Oct 21, 2016 7:20 pm
- Local Beach: Michigan
- Style: TT, HF, SB, snow, ice
- Gear: nothing special
-
Has thanked:
35 times
-
Been thanked:
14 times
Postby RagingGrandpa » Sat Sep 22, 2018 10:51 pm
== edit: corrections made now ==
The current Naish foil parts series is called "Thrust" and uses a 3-screw mast, not compatible w/ LF and not compatible with Hover.
Naish "Hover" (ie: 2017) foilsets use the same fat crappy mast as the old LF "foil fish":
https://www.youtube.com/watch?v=R_Gi2q9_zvs
https://kitesurfdubai.ae/wp-content/upl ... mplete.jpg
https://image.isu.pub/160222083825-62ab ... age_62.jpg
Shown above, those old "foil fish" orange LF masts are thicker than the (below) LF Rocket, Happy, and today's other current (black color) aluminum masts.
2017 Liquid Force aluminum mast:
So in conclusion, I haven't found any example of todays LF masts being used under brand names besides LF/Wakefoil/RideEngine/CloudIX.
Last edited by
RagingGrandpa on Wed Sep 26, 2018 2:40 pm, edited 4 times in total.
-
edt
- Very Frequent Poster
- Posts: 7316
- Joined: Fri Jul 16, 2010 6:27 am
- Kiting since: 2010
- Local Beach: Michigan
- Gear: ride hard, no regrets
-
Has thanked:
530 times
-
Been thanked:
664 times
Postby edt » Sat Sep 22, 2018 11:37 pm
Nice!! thanks
-
RagingGrandpa
- Medium Poster
- Posts: 97
- Joined: Fri Oct 21, 2016 7:20 pm
- Local Beach: Michigan
- Style: TT, HF, SB, snow, ice
- Gear: nothing special
-
Has thanked:
35 times
-
Been thanked:
14 times
Postby RagingGrandpa » Wed Sep 26, 2018 2:36 pm
More datapoints, for posterity-
2017 Slingshot Hoverglide aluminum mast:
2018 Airush Core Foil V2; Naish Thrust; RRD; Takuma; Gong
efoil.builders wrote:
http://efoil.builders/t/carbon-wings-op ... ble/2230/9
SoEFoil, Aug 24 2018
Since 2017, a few manufacturers have moved to the same standard: 3 screws spaced by 4cm : RRD, Takuma, Naish, Gong (55USD for 65cm mast), Airush … The mast is held by 3 screws diam 6mm, the fuselage is held by 2 x 6mm screws (could be 3). This profile is not symmetrical as profile max thickness is located at 40-45% from and closer to leading edge.
(2018?) North Speedster:
HendrikVdP wrote: ↑Mon Jul 09, 2018 2:16 am
here is what i measured from my North speedster mast :
Mast thickness : 15mm
Cord : 96mm
2 bolt fixing, M8 47mm apart
Baseplate 90mm x 165mm
-
RagingGrandpa
- Medium Poster
- Posts: 97
- Joined: Fri Oct 21, 2016 7:20 pm
- Local Beach: Michigan
- Style: TT, HF, SB, snow, ice
- Gear: nothing special
-
Has thanked:
35 times
-
Been thanked:
14 times
Postby RagingGrandpa » Wed Jun 26, 2019 8:40 pm
Cabrinha hi rise info:
Cab Driver wrote: ↑Wed Jun 26, 2019 3:08 pm
Masts are now 40/65/85 for the hi rise system. They have been stiffened up starting with the recently launched Hi Rise Varial and Carve foil kits. Previously, masts were 40/60/85. All masts are fit compatible from 2017 forward, but the 2020 masts are stiffer. Speed and Lift were launched in the 2019 product collection. The 2020 Lift will be reworked to fit on the new fuselage that is currently shipping with the Varial/Carve, as is the Speed. We had to change the fuselage to accomodate stiffness at the front connection as well as adding a third bolt. The pedestal mount has two sets of holes: 1/ regular countersunk holes to bolt into a track, and 2/ threaded holes designed to work with our through-bolted Double Agent board (bolting from the top of the board). The Track countersunk spacing is 90 x 110, while the Double Agent threaded is 90 x 140. I have no idea if the mast is compatible with another manufacturer, but the platform was shared with the now defunct CR:X.
Dims for Varial and Carve:
Varial Small:
Chord - 226mm
Projected area
- 116,508.2 mm2
Wingspan - 685.4mm
AR - 4.0
Volume - 1,621,983 mm3
Varial Medium:
Chord - 228mm
Projected area
- 132,988.2 mm2
Wingspan - 782.5mm
AR - 4.6
Volume - 1,718,735 mm3
Varial Large:
Chord - 230mm
Projected area
- 148,955.8 mm2
Wingspan - 880mm
AR - 5.2
Volume - 1,888,129 mm3
Carve:
Chord - 226mm
Projected area
- 116,508.2 mm2
Wingspan - 685.4mm
AR - 4.0
Volume - 2,024,170 mm3
Return to “Hydrofoil”
Who is online
Users browsing this forum: thatwildtype and 13 guests