A forum dedicated to Hydrofoil riders
-
gigibianchi
- Rare Poster
- Posts: 42
- Joined: Wed Sep 26, 2018 8:05 am
- Gear: LF
- Brand Affiliation: None
-
Has thanked:
11 times
-
Been thanked:
3 times
Postby gigibianchi » Fri Sep 28, 2018 9:26 am
Is there a specific grease that is better to use to avoid corrosion between aluminium screwing and stainless steel screws, or any type of grease can work?
-
Wazza Foil
- Frequent Poster
- Posts: 227
- Joined: Sat Mar 18, 2017 12:15 am
- Local Beach: Hams
- Style: Kite surfing strapless. Foil, SUP and ka
- Gear: lots
- Brand Affiliation: None
-
Has thanked:
8 times
-
Been thanked:
28 times
Postby Wazza Foil » Fri Sep 28, 2018 9:34 am
There are many suitable greases.
I use a water proof grease as used in boat trailer wheel bearings.
All good after 12 months.
-
Kamikuza
- Very Frequent Poster
- Posts: 7057
- Joined: Fri Jan 09, 2009 4:49 am
- Local Beach: Sabae Beach
- Favorite Beaches: Ol' Stinky
- Gear: This, that, the other
-
Has thanked:
220 times
-
Been thanked:
193 times
Postby Kamikuza » Fri Sep 28, 2018 11:34 am
TefGel. It's very sticky so things don't come undone, unlike the other anti-corrision stuff I tried.
-
SENDIT!
- Very Frequent Poster
- Posts: 922
- Joined: Sun Sep 22, 2002 1:00 am
- Kiting since: 2000
- Local Beach: Okaloosa Island
- Favorite Beaches: In no particular order; Kailua Beach, Oahu; Lake Nitinaht, BC; OBX
- Gear: Ocean Rodeo Flite 17 Aluula, North Reach 12, Ocean Rodeo Rise 10, Reach 9, Prodigy 7, Litewave Carbon Wing 165, Ocean Rodeo Mako 150, Poptart 139, Litewave Carbon Kick S 139, North Scoop/Sonar Surf Foil
- Brand Affiliation: Mojo Actionsports
- Location: Mojo Actionsports.com
-
Has thanked:
534 times
-
Been thanked:
61 times
Postby SENDIT! » Sat Sep 29, 2018 8:19 pm
Lanolin based (sheep's wool) marine grease is what is recommended by some manufacturers. Slingshot is now including a container of it with their foils. Lanocote is a brand that you can get at an autoparts or marine supply store. The Lanocote seems to be kind of a thick grease, whereas the stuff SS is providing is slightly more fluid. Wish we'd have had either of those for our first foil. We left it together in our lesson truck for, I don't know, 6 months, before we tried to disassemble it. *tried*
-
jyka
- Frequent Poster
- Posts: 366
- Joined: Sat Aug 10, 2013 7:38 pm
- Kiting since: 2012
- Weight: 85
- Local Beach: laru
- Style: freestyle
- Gear: mixed set
-
Has thanked:
19 times
-
Been thanked:
56 times
Postby jyka » Sat Sep 29, 2018 8:43 pm
RL-boards foil came with Weicon Anti-Seize paste, what is made of calcium hydroxide. It's very corrosive and I am afraid to use it because I bet sometime I get it to my hands -> eyes.
Would copper paste do the same job?
I don't know is it used widely, but some guys use tar spray to car bolts to prevent them to rust/seize..
-
airsail
- Very Frequent Poster
- Posts: 687
- Joined: Mon Jun 22, 2009 8:57 am
- Weight: 80kg
- Local Beach: Queens Beach North, Queensland, Australia
- Favorite Beaches: Queens North, I don’t travel much
- Style: Foiling
- Gear: Sonic 3 15mtr, Soul 10 mtr, BRM Clouds 8, 6.2, 4.8, 3.7
Lift, Naish and Levitaz foils
Carbonco and home build boards
Ozone and Duotone wings
Naish Hover 95 foilboard
- Brand Affiliation: None
- Location: Australia
-
Has thanked:
340 times
-
Been thanked:
168 times
Postby airsail » Sun Sep 30, 2018 12:30 am
I use this stuff, works well. I cover all joins and screw threads, assemble foil and wipe off excess.
http://www.powerupusa.net/pdf/techdata/thixogrease.pdf
-
tegirinenashi
- Very Frequent Poster
- Posts: 815
- Joined: Wed Aug 27, 2014 3:29 am
- Local Beach: 3rd Ave
- Gear: Bates 4000, Dominator MX-10
- Brand Affiliation: None
-
Has thanked:
33 times
-
Been thanked:
36 times
Postby tegirinenashi » Sun Sep 30, 2018 2:16 am
I suggest that anything that keeps water out of the threads would work. For example, you can lube the bolts with petroleum jelly; in fact, the supplied with foil grease looks like trivial Vaseline. For even more substantial water isolation one can use pipe cement. Obviously, pipe sealant is something to apply only at the outer most 5-10 mm, and not the entire thread. With water isolation you don't even have to bother frequently disassembling the foil for prolong periods, because there is nothing to corrode.
-
Kamikuza
- Very Frequent Poster
- Posts: 7057
- Joined: Fri Jan 09, 2009 4:49 am
- Local Beach: Sabae Beach
- Favorite Beaches: Ol' Stinky
- Gear: This, that, the other
-
Has thanked:
220 times
-
Been thanked:
193 times
Postby Kamikuza » Sun Sep 30, 2018 10:03 am
SENDIT! wrote: ↑Sat Sep 29, 2018 8:19 pm
Lanolin based (sheep's wool) marine grease is what is recommended by some manufacturers. Slingshot is now including a container of it with their foils. Lanocote is a brand that you can get at an autoparts or marine supply store. The Lanocote seems to be kind of a thick grease, whereas the stuff SS is providing is slightly more fluid. Wish we'd have had either of those for our first foil. We left it together in our lesson truck for, I don't know, 6 months, before we tried to disassemble it. *tried*
Bought some when I was back in NZ for my LF foil, and the bloody thing wouldn't stay together. Just kept unscrewing itself, especially mast to plate.
Didn't do anything with the SS foil, but it rarely got used in salt water.
Axis foils came with TefGel. I'm sold on that stuff
-
gigibianchi
- Rare Poster
- Posts: 42
- Joined: Wed Sep 26, 2018 8:05 am
- Gear: LF
- Brand Affiliation: None
-
Has thanked:
11 times
-
Been thanked:
3 times
Postby gigibianchi » Thu Oct 11, 2018 8:02 am
I found this MPL-EP grease (multi purpose lithium grease) at the closest hardware store. Do you guys think it could work?
-
Attachments
-
- Screenshot 2018-10-11 09.52.06.png (127.73 KiB) Viewed 1482 times
-
volume311
- Rare Poster
- Posts: 19
- Joined: Fri Jul 19, 2013 8:38 pm
- Local Beach: Newport RI
- Gear: Strings and blankets
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby volume311 » Fri Oct 12, 2018 2:04 am
Another vote for tefgel. Put mine together with it. It’s used extensively in marine environments. Every stainless bolt that goes into an aluminum mast on a sailboat should have it on there if you ever want to take it out again. It’s a bummer, I’m sure quite a few people figured out too late that galvanic corrosion is expensive.
Return to “Hydrofoil”
Who is online
Users browsing this forum: 20kts, Google [Bot] and 160 guests