Contact   Imprint   Advertising   Guidelines

Ozone speed system adjustment

For all foil kite riders


kitexpert
Frequent Poster
Posts: 367
Joined: Sun Aug 09, 2015 11:20 pm
Kiting since: 2003
Gear: many kites, also diy
Brand Affiliation: None

Re: Ozone speed system adjustment

Postby kitexpert » Sat Dec 30, 2017 1:56 pm

kitexpert wrote:
Sat Dec 30, 2017 1:50 pm
Pulley line lengths are not at all critical in length, as far as they are long enough to bar sheeting range.
Of course then A line of the mixer and brake extension must be of equivalent length to get everything even (or some appropriate lenght).

kitexpert
Frequent Poster
Posts: 367
Joined: Sun Aug 09, 2015 11:20 pm
Kiting since: 2003
Gear: many kites, also diy
Brand Affiliation: None

Re: Ozone speed system adjustment

Postby kitexpert » Mon Jan 01, 2018 1:22 am

It is possible to make a double pulley mixer by using only three pieces of line. Lighter, easier and faster to do, also unnecessary loops and connections are avoided.

Dyneema is so cheap and mixer is so simple it is no drawback to replace it all after pulley lines are worn out - which takes quite a long time any way.

One pulley mixer needs only two lines.

I don't see what is "pro" and "tune" in Ozone's mixer- it just looks an ordinary pulley system. Not very optimized one.


Return to “Foil Kites”

Who is online

Users browsing this forum: airfly and 6 guests

cron