My trusty Ozone Access has worn some of its floro bridle lines..... Does anyone know of a source for replacements or must I go back to Ozone? TIA

I used to buy spools of 80 and 150 lb sleeved bridle line online but I can't remember where. I believe the brand was "laser". Use figure eight knots and match the length from the other side of the kite. Good luck!
Chris

Thanks for the advice.......... I'll investigate this route.

hy windybrit,

i don't know what you mean by "floro bridle" lines, but i make all of the bridles myself. the spectra lines (red one) running through pulleys you'll probably find in your nearest boatshop like i did.

thinner white bridle line i've found in the fisherman's net shop. thickness is 1,5 mm. dirt cheap if you buy it bulk.

here are some pictures. i sew the bridle lines with the black line intentionally just to be able to monitor stitching quality after test use.

be sure your sewing machine has the zig-zag capability.

oh yeah

the spectra lines splices this way:

http://www.flysurfer.com/Content/158/?mnid=369

Since I do Kite Repairs... and sell Flysurfer and Ozone...
I have some Flysurfer white bridal line in stock and other line parts,
and some replacement Bridal line that come with Ozone kits.

Let me know if you need some...
Also if you need Special order....

Paul
www.PBKiteboarding.com