Hi fellow kiteboarders,
Just a few words to warn you all about some safety systems, recently in France (La Palmyre) a severe kite accident happened (details on flysurf.com), on 5 guys NO one could release their safety (the wind suddently increased from 15 to 35 knots) , 3 of them had safety systems using pins (similar as Takoon, Wipika...) and two others had snap shakle (wichard type).
It means that these systems DO NOT WORK UNDER HEAVY LOAD (or work BUT with a lot of strengh, 4 people were needed to release the safety!!!). These kiteboarders are taking the manufacturers to court but meanwhile no results are known about these systems.
My advice is to check if your safety works under load, for example hanging yourself in your harness and try to release it, and you will see for yourself if it works... Be aware that if you feel that it feels more difficult to release under a small load (like your own weight) imagine the power necessary to released in an extreme situation (wind gust from 15 to 35knots...)
ps: if everyone who does this little test can tell the results it can be interesting. The Naish X2 release system seems to work perfectly, But the snap shakle with the opening pin on the side DOES NOT under heavy load!!