*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 6 posts ] 
Author Message
 Post subject: $300. Criminal kiteboard...
PostPosted: Thu Nov 04, 2004 5:47 pm 
Offline
Very Frequent Poster
User avatar

Joined: Mon Nov 12, 2001 1:00 am
Posts: 1471
Location: Maryland USA
Jeff Howard the pony-tailed instructor in the BOOST series of videos, a major input on the AIRUSH kites and owner of his own shop in Texas ...has come up with an inexpensive board in two sizes: 120 and 130.

Image


At 85kg, I got the 130 and my first impression was not good. First thing - I went out in light condtions and I kept pearling the nose as the kite lost power. The UG Wave Tray I broke was longer at 147 and had those great flip-tips that always looked for daylight.My second session was much better, as there was enough wind to stay fullly powered most of the time.

This time it was like kiting in Vainilla icecream - SMOOTH. In short chop there was no chatter or that skatey feeling. The WT had zero rocker between the feet, whereas the Criminal has a constant rocker throughout. Even tho' there's not much flip to the tips, I didn't have a problem when I had enough kite to edge against. The rails of this board are very soft vs. the WT - and it could be that I've only had it for a couple of hours - but, I felt the WT made for better transitions as my memory thinks there was finer edge control coming around...

There's one thing I'll stomp and praise both - the footpad/strap setup. The footpads are really comfy like the NICE one's, but there's a design flaw in the strap.

Image

The straps have a lot of adjustment, but it's mostly useful one-way: closed. When you open the strap the inside neoprene covering stretches to accomidate your request, but pulls the strap back down as soon as you release. Where this becomes a problem hit me when I went out in booties in cold water - I simply could not get my feet in. The footpad has a lot of grabby texture and was fighting the sticky bootie soles. A disaster! I hated the board in 30seconds. The workaround was to simply stop, lay back in the water and fight your way into the straps.

I somewhat solved the problem by placing a section of foam under the strap to jam it open. So, yesterday, in bare feet, I hardly noticed?! That is - except how comfortable my feet were. Still, I don't think it a good setup for that shallow-water 'hop-on' start.

This board will not win a beauty contest in a kiteshop with all those over-decorated alternatives, and the visible screws are pretty industrial, but I trust Jeff Howard know's what works for the average kiter, as he's see everything from the first days of kiting. It needs to have a handle however...

The part that excites me is that I can hack this board easily. I'll make a winter strap setup this weekend, add a handle and strip the black printing and repaint it soon.

You can find these at: prokitesurf.com ...blowinginthewind.com (Price is actually like $320USD) ...and I'll add more comments as I get more time on it.

Jim
3Nov


{ SHARE_ON_FACEBOOK } { SHARE_ON_TWITTER } { SHARE_ON_ORKUT } { SHARE_ON_DIGG } { SHARE_ON_MYSPACE } { SHARE_ON_DELICIOUS }
Top
Profile
 Post subject:
PostPosted: Thu Nov 04, 2004 7:57 pm 
anyone take out the larger one?


Top
 Post subject:
PostPosted: Sat Nov 06, 2004 1:21 pm 
Offline
Very Frequent Poster
User avatar

Joined: Mon Nov 12, 2001 1:00 am
Posts: 1471
Location: Maryland USA
Yo! I'm not dating this board - I own her. She's the biggest mama Jeff offers - the 130. ..in fun.

Jim


Top
Profile
 Post subject:
PostPosted: Sun Nov 07, 2004 7:23 am 
Offline
Frequent Poster
User avatar

Joined: Thu Feb 05, 2004 1:43 am
Posts: 414
Location: Brisbane, no wait - Melbourne
Quote:
This board will not win a beauty contest in a kiteshop with all those over-decorated alternatives, and the visible screws are pretty industrial, but I trust Jeff Howard know's what works for the average kiter, as he's see everything from the first days of kiting


IMO, simple design is best. I think the boards look sick! now, if they produced a larger size for bigger guys and lighter conditions I might even consider buying one.....


Top
Profile
 Post subject:
PostPosted: Sun Nov 07, 2004 1:08 pm 
Offline
Very Frequent Poster

Joined: Thu Feb 20, 2003 7:14 pm
Posts: 586
I have been building very similar wood boards for about 3 years now. Concave bottom. I use birch instead of maple (almost as strong but lighter) and my boards are epoxy coated for durability. Custom sizes all the way up to 150x46. They work great. Nearly unbreakable and the weight is comparable to some of the more heavily built production boards.

Right now I sell the wood boards complete for $200 US plus shipping.

Trent


Top
Profile
 Post subject:
PostPosted: Tue Nov 09, 2004 3:27 am 
Offline
Very Frequent Poster
User avatar

Joined: Mon Nov 12, 2001 1:00 am
Posts: 1471
Location: Maryland USA
I got some more time on it Sunday. I was flying a R2-20 and the notable moment was when I got overpowered. The board 'stuck' a lot better than I expected. I expected the rail to slide because it's very round.. I like the smooth ride and pretty much everything so far 'cept the straps.

More fun was to come later when I switched to a 14M Takoon and a skimboard. We had super low tides and I was able to skim flat in four inches of water and then rail it upwind as soon as I was past the shallows.

I have footstraps on my flattie. I know it's not kosher, but I'm out to have fun - not prove anything.

Jim


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group