Contact   Imprint   Advertising   Guidelines

Balsa blanks...

Here you can exchange your experience and datas about your home build boards
Post Reply
User avatar
Wetstuff
Very Frequent Poster
Posts: 1471
Joined: Mon Nov 12, 2001 1:00 am
Local Beach: Assateague National Seashore, Maryland
Gear: Ozone WASP wind wing
Naish 8-0 Directional
Sand kart
Brand Affiliation: None
Location: Maryland USA
Has thanked: 0
Been thanked: 1 time

Balsa blanks...

Postby Wetstuff » Thu Jun 02, 2005 10:37 pm

Image


I don't want to turn this into a big advert, but we're now cutting blanks.
More can be seen: wetstuff.com in the boards section.

Thanks

Jim
Top
Rogue Wave
Frequent Poster
Posts: 237
Joined: Sat Jun 14, 2003 4:18 pm
Local Beach: Wasaga Beach Ontario Canada
Style: None
Brand Affiliation: Rogue Wave Custom and Jimmy Lewis boards.
www.roguewaveboards.com
www.jimmylewis.ca
Location: Wasaga Beach Ontario Canada
Has thanked: 0
Been thanked: 0

Postby Rogue Wave » Fri Jun 03, 2005 1:10 am

Can't link to your site for some reason.

Lee
http://www.roguewaveboards.com
Top
User avatar
Wetstuff
Very Frequent Poster
Posts: 1471
Joined: Mon Nov 12, 2001 1:00 am
Local Beach: Assateague National Seashore, Maryland
Gear: Ozone WASP wind wing
Naish 8-0 Directional
Sand kart
Brand Affiliation: None
Location: Maryland USA
Has thanked: 0
Been thanked: 1 time

Postby Wetstuff » Thu Jun 09, 2005 1:10 pm

Sorry for the timing - I switched servers. It's back up. I'm also adding pre-rockered (eh?) marine ply blanks.

jim
Top
zfennell
Very Frequent Poster
Posts: 975
Joined: Wed Nov 20, 2002 1:00 am
Brand Affiliation: None
Location: rhode island
Has thanked: 0
Been thanked: 0

Postby zfennell » Thu Jun 09, 2005 3:00 pm

Do they have a glass lay-up ?
..or is that the scrim backing?
Top
User avatar
Wetstuff
Very Frequent Poster
Posts: 1471
Joined: Mon Nov 12, 2001 1:00 am
Local Beach: Assateague National Seashore, Maryland
Gear: Ozone WASP wind wing
Naish 8-0 Directional
Sand kart
Brand Affiliation: None
Location: Maryland USA
Has thanked: 0
Been thanked: 1 time

Postby Wetstuff » Fri Jun 10, 2005 3:26 pm

ZF: Not scrim - it's Baltek's pre-glassed 'bulkhead' material with 12oz cloth and 8oz mat on either side. I'm not sure if the resin is UV cure or what, but it's essentially RTF (ready-to-finish). I've got two fairly large boat plants within 1mi. of my shop and see the truck once a week.

jim
Top
Post Reply

Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 145 guests

Copyright © kiteforum.com 2001-2025