Here you can exchange your experience and datas about your home build boards
-
trozen
- Rare Poster
- Posts: 47
- Joined: Thu Apr 10, 2003 9:25 am
- Brand Affiliation: None
- Location: israel
-
Has thanked:
0
-
Been thanked:
0
Postby trozen » Mon Apr 25, 2005 6:16 am
which should be the best 2 use ?
-
chassan
- Frequent Poster
- Posts: 427
- Joined: Tue Aug 06, 2002 1:00 am
- Brand Affiliation: None
- Location: Sto. Domingo, Dominican Rep.
-
Has thanked:
0
-
Been thanked:
0
Postby chassan » Mon Jun 20, 2005 2:41 pm
The first board I made was using a layer of Peel Ply ( is called Econoply at fiberglasssupply.com) and a layer of breather, it didn't work well for me, so since then I'm using 2 layers of the Econoply and is working perfectly.
Here's the link
http://fiberglasssupply.com/Product_Cat ... gging.html
-
sailrtnow
- Rare Poster
- Posts: 16
- Joined: Fri May 27, 2005 1:34 pm
-
Has thanked:
0
-
Been thanked:
0
Postby sailrtnow » Tue Jun 21, 2005 4:47 pm
This is the release fabric I use, and it comes off every time.
http://www.jamestowndistributors.com/es ... &BANNERID=
I just do my layup and put a sheet of release fabric and then a layer of breateher fabric then put it in the bag. If your release is sticking try using more breather fabric.
-
crabman
- Medium Poster
- Posts: 158
- Joined: Mon Dec 05, 2005 4:44 pm
-
Has thanked:
0
-
Been thanked:
0
Postby crabman » Mon Dec 19, 2005 6:30 pm
If you cant get a release film ,plastic bin liners are good .If you want to bleed resin through it put small holes in it.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 276 guests