Bronco (High Performance)
6.0
9.0
12.0
16.0
21.0
No segmented tube, the harmonical bent fronttube has been created that way to reduce turbulances
Carbon bar at the tips, carbon scuff pads at the end of the bladders to protect the wear out points. One front connection, two backside connection to vary the turning speed
bladders fitting the shape of the fronttube
on the whole length of the fronttube there is on panel directly at the tube for better aerodynamics.
Protection around the valve to avoid getting sand and water between inner and outer tube
Without picture:
Stinger (Intermediate)
1.8
4.0
6.0
8.0
11.
14.0
Boards (very flexible!)
Dorado
174x39.5
Outlaw
142x36
Accessories
Bar with punsh out technology (push the bar away from you up to the stopper with some pressure, then it will release the quick release at the chicken loop)
Kite Bag
very nice and good quality with good straps for easy carriage, board can be attached to it.
Dry Suit
no neoprene, you can wear yopur cloth underneath it
Stretchable material at the knees and the hip
The zipper is of best quality (the same are being used for dive suits)
The suit is made to last very long(about 10 years or even more). But the neoprene at the arm and legs will last about 2-3 years.
To replace it just cut it of and glue a new one to it.
copyright kiteforum.com
