Here you can exchange your experience and datas about your home build boards
-
waterboards
- Medium Poster
- Posts: 55
- Joined: Wed Jul 06, 2005 2:01 pm
- Brand Affiliation: None
- Location: south fl
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby waterboards » Thu Dec 29, 2005 6:18 pm
To all you home grown board builders keep it up, I would like to help you all out with your project boards. So if you want to make your board look as good as it rides shoot me a e-mail and I can make you some custom graphics that you can glass in with the lay up. I can print anything you want all I need is the computer file. This way you can make your custom look like a production board, you could laminate it over ply wood if you want. So go play in photo shop and have fun.
-
jrobson
- Very Frequent Poster
- Posts: 843
- Joined: Tue Mar 15, 2005 10:28 pm
-
Has thanked:
0
-
Been thanked:
0
Postby jrobson » Thu Dec 29, 2005 6:44 pm
How much?
-
waterboards
- Medium Poster
- Posts: 55
- Joined: Wed Jul 06, 2005 2:01 pm
- Brand Affiliation: None
- Location: south fl
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby waterboards » Fri Dec 30, 2005 7:43 pm
That would be a case by case send me a PM with what you want, or just post your graphics tell me what size and I'll PM you a number. They can be made big enough to cover surfboards, they can be 62" wide by, well as long as the roll.
for a standard kiteboard you would want a file 20" wide x56" long one for the top and one for the bottom. If it is a large file you may have to mail me a CD.
-
alawhead
- Rare Poster
- Posts: 48
- Joined: Thu Dec 02, 2004 12:59 am
-
Has thanked:
0
-
Been thanked:
0
Postby alawhead » Mon Jan 16, 2006 3:19 pm
if i found a sticker that would make a cool graphic, could i send the sticker , or does it have to be a "file"
-
waterboards
- Medium Poster
- Posts: 55
- Joined: Wed Jul 06, 2005 2:01 pm
- Brand Affiliation: None
- Location: south fl
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby waterboards » Mon Jan 16, 2006 4:16 pm
I need a file. I don't have time and am not good at computer graphics or any graphics for that matter. I will do a contest in time for graphics.
The cost is 75$ for a complete board or 50$ if you order 5 boards. It will have to be made with a batch that I do.
Great deal to make your home build board look like a production board.
You can seal your ply board and install the graphics in one shot then just hot coat.
If you bag them just put it in with the board take it out of bag hot coat and your done.
-
buddy2227
- Rare Poster
- Posts: 12
- Joined: Sun Oct 23, 2005 4:10 am
-
Has thanked:
0
-
Been thanked:
0
Postby buddy2227 » Thu Mar 16, 2006 5:33 pm
What is "hot coat"
how do u do it and what materials do u need
thanx
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 176 guests