here you can exchange your experience and datas about your home build boards
- Rare Poster
- Posts: 17
- Joined: Mon Sep 05, 2005 9:15 pm
- Kiting since: 2005
- Local Beach: Langebaan
- Favorite Beaches: Langebaan Main Beach
- Style: Freestyle
- Gear: 2015 Naish Park 9m
2016 Vanhanks Flexi Board (first ever Production twintip)
- Brand Affiliation: Bluebat
- Location: South Africa
What is resin infusion, pre preg and how do you get your finnish to be good anouth without sanding?
Sorry for all the questions, but i've been sanding my board for almost 2 day (after work) to get a good finnish.
- Rare Poster
- Posts: 32
- Joined: Thu Dec 01, 2005 9:59 pm
- Kiting since: 0
- Brand Affiliation: None
- Location: Saddleworth, UK
Bluebat wrote:IÃ¢â‚¬â„¢ve build my first kiteboard with the vacuum bagging principle. The board came out very nice, except for a few air bubbles on the bottom of the boards
I use self adhesive PTFE coated glass fibre on the rocker.
(from AeroVac in UK), expensive but worth every penny.
Its slightly porous so it allows trapped vapours to bleed away.
Also its tricky to lay on curved surfaces but gives excellent release
every time with a class A finish. I use prepreg but should work on wet layup as well.
Return to “Board Builders”
Who is online
Users browsing this forum: No registered users and 7 guests