Contact   Imprint   Advertising   Guidelines

Another Ply Skimboard

here you can exchange your experience and datas about your home build boards


Mike W
Rare Poster
Posts: 36
Joined: Fri Feb 21, 2003 10:02 pm

Another Ply Skimboard

Postby Mike W » Fri May 25, 2007 5:25 pm

2 pieces of 1/4" birch glued. Fancy pattern with the 3M tape. It rides like a dream. 51"x21".
Attachments
ply1.jpg
ply1.jpg (135.63 KiB) Viewed 1599 times
ply2.jpg
ply2.jpg (110.81 KiB) Viewed 1598 times

Spinal
Rare Poster
Posts: 16
Joined: Wed May 24, 2006 1:55 am
Kiting since: 0
Brand Affiliation: None
Location: Vermont, USA

Ply skimboard

Postby Spinal » Sat May 26, 2007 6:27 pm

Nice board. Hoping to build one myself. What did you coat it with?

Mike W
Rare Poster
Posts: 36
Joined: Fri Feb 21, 2003 10:02 pm

Postby Mike W » Mon May 28, 2007 2:04 am

I used spar varnish, which can be acquired at any home improvement center. Seems to hold up to H20 better than the standard stuff.


Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 2 guests