Hello friends and Toby check this link out just as an idea... http://www.antal.it/inglese/index_en.htm.
. click on rope cluth...Toby the Servo cleat is similar to the dog/aligator cleat I was trying to mention.. But it wouldnt have the metal going over the teath.. All one would have to do if this was permantly attached to one side of the harness. And instead of the nylon strips we sinch down. A rope would be atachted to the same side as the Sevro cleat permantly.. then accross to a simply mounted pully back thru the harnees eye or hook. Then cleat it down into the Servo cleat.. So this would mean the harness would be as tight as you wonted to sinch it down.. to release it.. simply pull out-ward and let go.. The rope pulls reverse out of everything there for letting loose of the controll bar..
NOW looking at the so called v-grip maxi..
This cleat looks like something we could use also... Maybe even a better Idea! Now my Wipika bar main hoop is simply attached w/ velcro.. So imagine this, on one side instead of velcro. we simply mount a similar product like this v-grip to only one side of the hoop... Putting the rope thru the v-grip
it sinches down and makes it permanent.. It appears that all is takes to release that side thru the v-grip would be to pull aprox 1-2inches and the hoop pulls out and simply releases the hoop from the harness hook!
Now again I see this only for the main hook not the chicken loop.. But hey it may be a start.. I think we should use some of this sailing tech. to improve are safty.. Im sure there are kinks that can be worked out...
Now im just a rookie to everybody else.. Why cant they kite manufactors check out similar options.. Theres products out there.
I'll continue to look at other poss sailing tech. that can help and let you know..
<font size=-1>[ This Message was edited by: SKIBUMNCO on 2002-06-13 17:12 ]</font>