my release config

[murdoc]

<img src="http://people.work.de/murdoc/1.jpg"><p>
<img src="http://people.work.de/murdoc/2.jpg"><p>
<img src="http://people.work.de/murdoc/3.jpg"><P>

this is my safety-setup.
i'm using it for quite a time now.

[Guest]

What are the two black lines for on the last picture? Is this where you attach your safety leash?

[Guest]

Could you post another pic but then zoom a bit out. That way I can see the complete config.

[murdoc]

the black line's a loop which is attached to the center of the shackle as you can see on the pic.

this one leads to a release system taken from an old wipika-bar.
you're right, that's where the safety's attached.

the black line's the end of a 150kp flying line.