Heyya m8s
I am new to this building and I thought that if we can what is what and what is what for can be good for all beginners like me also
1.what is ABS rails and what is it for?
2.concave?
3.which wood is the best for it?
4.what is epoxy and what for?
5.what is resine and what for?and how many types of it and describing them also
6.what is laminate and what for?
7.what is vacuum and what for?
8.what is pressing means and what for?
9.how to print on board?
10.what is the differences of shapings and what for?

Thanks from now

If you wish u can also add more questions as well

Hola,

i will answer some of your questions, i will try to explain the best i can, english is my 2nd languaje so spare any mistake. the ones i didnt answer i dont know how to explain it.

Concave: is the curvature of the board got it?
epoxy: i understand that is similar to resin (glue use for fiberglass work)
laminate: is the process of putting different layers (foam core or wood + fiber+ fiber + etc) in the board build process (sandwich technology)

vacuum: is when we use a vacuum pump (equipment that sucks air and press the laminate process altogether ) the result is a thin compact board.
pressing: is when you dont use a vacumm pump or vacuum process, so you have to apply weigh by pressing and let the board cure the wet resin and fiber

i hope this gives you an idea, i may be not 100% accurate in some, good luck!

Ch.

thanks m8 alot
so can u tell the board building step by step