Here you can exchange your experience and datas about your home build boards
-
hobbsla
- Rare Poster
- Posts: 18
- Joined: Sat Nov 15, 2008 8:55 am
- Brand Affiliation: None
- Location: Eastern Washington
-
Has thanked:
0
-
Been thanked:
0
Postby hobbsla » Thu Feb 26, 2009 4:12 am
Thanks SalmonSlayer. That is the method I will use!
CNC machine....yeah I wish! I'm building my 1st plywood board.....total FNG
Thanks for the feedback everybody.
-
zob
- Frequent Poster
- Posts: 476
- Joined: Tue Feb 24, 2009 1:43 pm
- Local Beach: Grado Pineta (IT), Fossalon (IT)
- Style: Freeride, strapless hooked-in
- Gear: FS S3 19m2 DLX, S3 CE 12m2 DLX & S4 8m2 DLX
Homemade Surf & Snow Boards
MBS Pro90
- Location: Iv.G.-Slovenia
-
Has thanked:
21 times
-
Been thanked:
3 times
-
Contact:
Postby zob » Thu Feb 26, 2009 8:57 am
Hey!
It can be done with a patern to! The point is that you don't have to mess around with inserts during the lamination, and search for them through the layer of cured epoxy, and clean the threads filled with wax.
With this kind of inserts you just bore, glue and screw.
The only minus is the price! 0.7 €/pc, so 7 €/board
-
travelerphotography
- Rare Poster
- Posts: 6
- Joined: Fri Feb 29, 2008 4:55 am
- Local Beach: I live here on Oahu, Hawaii so I kite Kaneohe Bay, Kailua and Mokuleia.
- Favorite Beaches: The lakes by my cabin in Pilot Point, Alaska. I also like Cayman Islands, Aruba and Hatteras.
- Style: Surf, Skim, Wake
- Gear: LF and Cabrinha
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby travelerphotography » Wed Apr 22, 2009 7:05 pm
Hey all,
I just ordered a 7 foot surfboard blank (blem) that im going to shape into a twintip. I have never made one before but i think i get the general idea. One major question though, well two actually: where do i get the foot strap threaded inserts and how do i deal with the holes for the fins (remember im building a foam board). if i just drill the glass and foam, ill get water in the hole and foam. it also seems like the screws might crack or crush the glass even if the holes are protected form water.
Also does anyone know of a good location to get various plans. I know roughly what i want, but i would like to see the exact number on what others have done.
thanks
Traveler
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 144 guests