Here you can exchange your experience and datas about your home build boards
-
Tadej
- Rare Poster
- Posts: 22
- Joined: Wed Nov 26, 2008 7:34 pm
- Local Beach: grado-italy
- Favorite Beaches: domenicana, lefkada, fosalone, grado
- Style: wave, freestyle
- Gear: northkiteboarding vegas 7 9 12
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Tadej » Wed Nov 26, 2008 7:58 pm
My old account is unactive, so I have to create new one...
down there is the point ...
Last edited by
Tadej on Wed Nov 26, 2008 8:21 pm, edited 1 time in total.
-
Tadej
- Rare Poster
- Posts: 22
- Joined: Wed Nov 26, 2008 7:34 pm
- Local Beach: grado-italy
- Favorite Beaches: domenicana, lefkada, fosalone, grado
- Style: wave, freestyle
- Gear: northkiteboarding vegas 7 9 12
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Tadej » Wed Nov 26, 2008 8:18 pm
Tadej wrote:here is some pictures of my new kiteboard. Every year something new, this year is core and my own design (like every year
),fins are the same ..flex is amazing, pop-ufffff
It is freestyle board....132 x 41
At the moment board have this white pads and straps, because, when I was shooting this pictures, my Liquid Force pads-straps were on the water
some pictures....
core: hand made of curse,...lots of work
TOP, without fins (only on the pictures):
BOTTOM
Board is amazing to ride, good in all conditions (chop, flat, surprice me on the waves
)
and some fresh logo "CustoMs" for fresh board....
soon I will add girly edition
"bubbly" of my girlfriend...
carpe diem
-
nonce
- Rare Poster
- Posts: 24
- Joined: Sat Jan 03, 2004 4:57 pm
- Gear: Flysurfer, Globekites
- Brand Affiliation: None
- Location: Riga, Latvia
-
Has thanked:
0
-
Been thanked:
0
Postby nonce » Thu Nov 27, 2008 4:16 pm
Goood board wery nice.
This green stuff (board rails) what material is it?
-
Tadej
- Rare Poster
- Posts: 22
- Joined: Wed Nov 26, 2008 7:34 pm
- Local Beach: grado-italy
- Favorite Beaches: domenicana, lefkada, fosalone, grado
- Style: wave, freestyle
- Gear: northkiteboarding vegas 7 9 12
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Tadej » Mon Dec 01, 2008 12:21 pm
tnx, ...whell material is two component, but its local product, I dont know details of this stuff, but have flex and its good. you can chose color if you add some color pigment, in this case is it green.
-
BWD
- Very Frequent Poster
- Posts: 3849
- Joined: Thu Jun 05, 2003 3:37 am
-
Has thanked:
2 times
-
Been thanked:
81 times
Postby BWD » Mon Dec 01, 2008 10:07 pm
Probably a urethane.
-
stvandev
- Rare Poster
- Posts: 38
- Joined: Sat Feb 02, 2008 6:10 pm
- Local Beach: New Hampshire/Vermont
- Favorite Beaches: Key West, Lake Michigan
- Style: Learning
- Gear: LF Havoc 14, 8, Eclipse Nano 6
- Brand Affiliation: None
- Location: Lebanon, NH
-
Has thanked:
0
-
Been thanked:
0
Postby stvandev » Mon Dec 01, 2008 11:03 pm
Awesome looking board. How do you do your graphics? What are you using for a top and bottom finish?
-
Tadej
- Rare Poster
- Posts: 22
- Joined: Wed Nov 26, 2008 7:34 pm
- Local Beach: grado-italy
- Favorite Beaches: domenicana, lefkada, fosalone, grado
- Style: wave, freestyle
- Gear: northkiteboarding vegas 7 9 12
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Tadej » Tue Dec 02, 2008 11:18 am
graphics was printed on digital printer, design is my, top finish is some special laminat which was good on the send and small rocks when was water reaaallyyy shallow.
-
jchambers19
- Rare Poster
- Posts: 1
- Joined: Thu Jun 25, 2009 10:45 am
- Style: None
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby jchambers19 » Thu Jun 25, 2009 10:47 am
the core looks sweet! what is the construction techniques and materials for that?
many thanks!
-
aeberl
- Very Frequent Poster
- Posts: 659
- Joined: Tue Nov 22, 2005 10:57 pm
-
Has thanked:
0
-
Been thanked:
1 time
Postby aeberl » Thu Jun 25, 2009 6:54 pm
Tadej wrote:graphics was printed on digital printer, design is my, top finish is some special laminat which was good on the send and small rocks when was water reaaallyyy shallow.
What ink and on which film did you print?
-
Bstevs
- Frequent Poster
- Posts: 218
- Joined: Tue Jun 23, 2009 8:55 pm
- Local Beach: Long Island
- Style: Freestyle/Wakestyle
- Gear: Airush vapor III 12,10m, Airush FS pro132 board, 2010 Cab Custom140/Ronix Ones
- Brand Affiliation: Airush
- Location: Long Island, NY
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby Bstevs » Thu Jun 25, 2009 7:00 pm
Thats a really hot looking board
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 44 guests