Contact   Imprint   Advertising   Guidelines

e-glass to carbon equivalence

here you can exchange your experience and datas about your home build boards

Very Frequent Poster
Posts: 658
Joined: Tue Nov 22, 2005 10:57 pm

e-glass to carbon equivalence

Postby aeberl » Mon Jul 20, 2009 7:36 pm

I have glass lamination dialed to the point were I can fine-tune flex patterns by placing more or less glass to certain parts of the board. Now I am about to start experimenting with carbon and am wondering if there is a constant factor that relates e-glass to carbon. Is it possible to say that for example on layer of 6oz. plain weave e-glass gives you the same mechanical propertie as x oz. of 3k plain weave carbon?

Very Frequent Poster
Posts: 975
Joined: Wed Nov 20, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None
Location: rhode island

Re: e-glass to carbon equivalence

Postby zfennell » Mon Jul 20, 2009 9:17 pm

matweb is a good place to start.

not likely you will find a fudge factor for laminates.
but they will give you fiber properties for various vendors and grades.

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 2 guests