Here you can exchange your experience and datas about your home build boards
-
aeberl
- Very Frequent Poster
- Posts: 659
- Joined: Tue Nov 22, 2005 10:57 pm
-
Has thanked:
0
-
Been thanked:
1 time
Postby aeberl » Mon Jul 20, 2009 7:36 pm
I have glass lamination dialed to the point were I can fine-tune flex patterns by placing more or less glass to certain parts of the board. Now I am about to start experimenting with carbon and am wondering if there is a constant factor that relates e-glass to carbon. Is it possible to say that for example on layer of 6oz. plain weave e-glass gives you the same mechanical propertie as x oz. of 3k plain weave carbon?
-
zfennell
- Very Frequent Poster
- Posts: 975
- Joined: Wed Nov 20, 2002 1:00 am
- Brand Affiliation: None
- Location: rhode island
-
Has thanked:
0
-
Been thanked:
0
Postby zfennell » Mon Jul 20, 2009 9:17 pm
matweb is a good place to start.
http://www.matweb.com/index.aspx
not likely you will find a fudge factor for laminates.
but they will give you fiber properties for various vendors and grades.
-bill
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 172 guests