Contact   Imprint   Advertising   Guidelines

3D Model of Kiteboard

Here you can exchange your experience and datas about your home build boards
K1W1
Medium Poster
Posts: 67
Joined: Sat Nov 10, 2007 11:52 pm
Brand Affiliation: None
Location: Australia
Has thanked: 0
Been thanked: 0

3D Model of Kiteboard

Postby K1W1 » Tue Sep 01, 2009 11:22 am

I was thinking of making a wood core for a kiteboard using a CNC milling machine. To do this I need a 3D model of a kiteboard to generate a program for the CNC mill, which I don’t have .Has anyone generated a 3D model of a kiteboard that they would like to share.

lex123
Medium Poster
Posts: 85
Joined: Fri Feb 01, 2008 2:40 am
Local Beach: Narrabeen / Long reef Beach, Sydney, Australia
Favorite Beaches: Narrabeen
Longreef
Style: Wake
Gear: North Team Series 133
North EVO 11 & 7
Brand Affiliation: North and Naish
Has thanked: 0
Been thanked: 0

Re: 3D MODEL OF KITEBOARD

Postby lex123 » Tue Sep 01, 2009 11:48 am

I'm studying Industrial design at the moment. quite fluid in Solid edge, solid works and Rhino. Most of these programs will alow you to generate the coding.... failing that you could always learn G and M code,,,, always interesting hahaha.

here is a board and bindings i made for a project/fun. The bindings were the actual project, modelling a board is very simple. Programs like solid edge and works will be better for what you are looking to do.
Attachments
Axis1.jpg
Axis2 copy.jpg

nonce
Rare Poster
Posts: 24
Joined: Sat Jan 03, 2004 4:57 pm
Gear: Flysurfer, Globekites
Brand Affiliation: None
Location: Riga, Latvia
Has thanked: 0
Been thanked: 0

Re: 3D MODEL OF KITEBOARD

Postby nonce » Tue Sep 01, 2009 1:28 pm

what kind of model do you need, it can be done in different ways. Easiest way is to mill flat core and than laminate it on a rocker table.
http://www.youtube.com/watch?v=uwPuSg-xYHs

K1W1
Medium Poster
Posts: 67
Joined: Sat Nov 10, 2007 11:52 pm
Brand Affiliation: None
Location: Australia
Has thanked: 0
Been thanked: 0

Re: 3D Model of Kiteboard

Postby K1W1 » Wed Sep 02, 2009 11:17 am

I was thinking of making the core out of a solid piece of Paulownia with both the rocker and concave shaped into the core by the cnc machine.
The bottom of my production board recently delaminated allowing me to see the wood core. The core was made from three pieces of wood laminated together .The bottom of the board had a quad concave design which would make it hard to make unless you used a cnc machine ?
So my plan now is to try a measure up my new board on the cnc machine and try to get a series of profiles so the designer at work can generate a 3d model of the board. The only trouble is getting machine time.
Any way it’s a long term project to fill in time when works quite and the winds not blowing.

nonce
Rare Poster
Posts: 24
Joined: Sat Jan 03, 2004 4:57 pm
Gear: Flysurfer, Globekites
Brand Affiliation: None
Location: Riga, Latvia
Has thanked: 0
Been thanked: 0

Re: 3D Model of Kiteboard

Postby nonce » Wed Sep 02, 2009 12:54 pm

no probs with model CAD/CAM its my workingday.
Machined concave yes but rocker it is just a waste of material IMHO.

zfennell
Very Frequent Poster
Posts: 975
Joined: Wed Nov 20, 2002 1:00 am
Brand Affiliation: None
Location: rhode island
Has thanked: 0
Been thanked: 0

Re: 3D Model of Kiteboard

Postby zfennell » Wed Sep 02, 2009 1:49 pm

get a copy of...
boardcad
or
shape-3d (?)
or
any of the other share-ware apps for boards

rhino, solidworks, proE, IDEAS, the list goes on forever if you have money.

hein at Impact-3d.com probably already has a file and core whittled down to size, even as we speak.

however i got to admit.
milling the rocker out of a plank of wood, seems like a very poor way of keeping its good flexural strength.

IMO,
build a rocker table and lay-up your core on top of that.
...
or use one of the structural foams (divinylcell, corecell, etc), then lam with glass
or use cheap EPS for the core and lam with 1/16" wood and glass

perhaps play with a bit of plywood to sort out the details.
the list goes on.

regardless,
it all works and still fun.

-bill

yoyoflavored
Rare Poster
Posts: 5
Joined: Fri Aug 14, 2009 3:11 am
Local Beach: dont kiteboard yet
Favorite Beaches: look at above
Style: read that^
Gear: looking at liquid force
Brand Affiliation: liquid force and best kiteboarding
Has thanked: 0
Been thanked: 0

Re: 3D Model of Kiteboard

Postby yoyoflavored » Sun Sep 06, 2009 7:15 am

im working on one because me dad has a program i can use and he might mill the oard or a mold for it ill try to ge u my first design

K1W1
Medium Poster
Posts: 67
Joined: Sat Nov 10, 2007 11:52 pm
Brand Affiliation: None
Location: Australia
Has thanked: 0
Been thanked: 0

Re: 3D Model of Kiteboard

Postby K1W1 » Sun Sep 06, 2009 9:13 am

I'm going to try and find a supplier of paulownia timber and get a price. I’ve decided to try and generate a rocker less 3d model of my own production board. I made a rocker table a few years ago when making ply wood boards so will use this to generate rocker when glassing the board. Not to sure on the amount of spring back once the board is taken of the rocker table? If and when I finally finish the wood core I will have to ask advice on a suitable glass layup for a kite board. Initial thoughts are to have two layers of 6oz on the bottom, two layers on the top with a third layer around the foot pad area.

zfennell
Very Frequent Poster
Posts: 975
Joined: Wed Nov 20, 2002 1:00 am
Brand Affiliation: None
Location: rhode island
Has thanked: 0
Been thanked: 0

Re: 3D Model of Kiteboard

Postby zfennell » Tue Sep 08, 2009 12:23 pm

pete from addiction kite boards is /was in Oz.
his boards were make from pawlonia.
i doubt you will need much , if any, glass
his cores were approx 1/2 inch thick

my guess is just enough to set the desied rocker.
the solid (no transverse grain) core will be stiffer than any of your ply projects.

if you cannot locate him directly, there are lots of old threads about his build process on
yahoo/groups/ boardbuilding

User avatar
vol
Frequent Poster
Posts: 231
Joined: Sat May 28, 2005 6:18 pm
Local Beach: Tarifa Spain
Favorite Beaches: Tarifa Spain, Prassonisi Rhodes, Brazil Taiba-Cumbucu-Paracuru
Style: hydrofoil, bigair, freestyle
Gear: Saul Custom Boards
Location: Tarifa Spain
Has thanked: 9 times
Been thanked: 14 times

Re: 3D Model of Kiteboard

Postby vol » Tue Sep 15, 2009 7:24 pm

For me very friendly google sketchup
Attachments
2d redkitebording.jpg


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 117 guests