Here you can exchange your experience and datas about your home build boards
-
AIR-TASTIC
- Medium Poster
- Posts: 106
- Joined: Sun May 27, 2007 4:56 pm
- Brand Affiliation: None
- Location: Winchester
-
Has thanked:
0
-
Been thanked:
0
Postby AIR-TASTIC » Thu Dec 24, 2009 7:54 pm
I want custom graphics - finish must be a priority
a fab upwind board - for an intermediate
good for jumps, but not at the expense of anything else
96Kgs
as light as possible
Award winning in terms of pro-rider, a good thing but not a "must"
WHO
HOW MUCH
-
decay
- Frequent Poster
- Posts: 467
- Joined: Sun Oct 20, 2002 1:00 am
- Kiting since: 2000
- Local Beach: Muizenburg, Cape Town
- Favorite Beaches: Ruakaka River Mouth
- Style: ALL
- Gear: Stuff I design
- Brand Affiliation: Lacuna CTO
- Location: Muizenburg, Cape Town
-
Has thanked:
68 times
-
Been thanked:
150 times
-
Contact:
Postby decay » Fri Dec 25, 2009 9:21 pm
Do you kiteloop/land hard/have broken boards before?
What is your kite quiver?
What board are you currently riding?
Will you supply your own graphics (AI, EPS, PDF etc) or do you want it designed for you?
Cheers
Dave Kay
www.decaykiteboards.co.nz
-
AIR-TASTIC
- Medium Poster
- Posts: 106
- Joined: Sun May 27, 2007 4:56 pm
- Brand Affiliation: None
- Location: Winchester
-
Has thanked:
0
-
Been thanked:
0
Postby AIR-TASTIC » Sat Dec 26, 2009 1:39 pm
decay wrote:Do you kiteloop/land hard/have broken boards before?
What is your kite quiver?
What board are you currently riding?
Will you supply your own graphics (AI, EPS, PDF etc) or do you want it designed for you?
Cheers
Dave Kay
www.decaykiteboards.co.nz
I haven't broken a board to date
I use a North Defender board right now
I will provide my own graphics but they MUST look part of the board, not glued on or resined in
I do some loops in lower breezes
I use Rhino 05s but will change to Rebel 10s soon
-
decay
- Frequent Poster
- Posts: 467
- Joined: Sun Oct 20, 2002 1:00 am
- Kiting since: 2000
- Local Beach: Muizenburg, Cape Town
- Favorite Beaches: Ruakaka River Mouth
- Style: ALL
- Gear: Stuff I design
- Brand Affiliation: Lacuna CTO
- Location: Muizenburg, Cape Town
-
Has thanked:
68 times
-
Been thanked:
150 times
-
Contact:
Postby decay » Sun Dec 27, 2009 2:18 am
AIR-TASTIC wrote:
I haven't broken a board to date
I do some loops in lower breezes
Cool - shouldn't need to bump the laminate up more than our standard
AIR-TASTIC wrote:
I use a North Defender board right now
Is that the 150?
AIR-TASTIC wrote:
I will provide my own graphics but they MUST look part of the board, not glued on or resined in
Well our graphic process is a digital print onto fabric which is laminated into the board as part of the reinforcement. It is about as part of the board as it is possible to get. We do have some technical limits with the process, but we can discuss those in more detail. Our graphics are always a little bit opaque so it is possible to see the wood core thru the graphic. We can provide an outline mask for AI or Corel Draw so you can get the graphic to look right on the final board.
AIR-TASTIC wrote:
I use Rhino 05s but will change to Rebel 10s soon
Rebels are good low end power style of kites, I think I would recommend you onto our Falcata Performance TT, in a 139x41. Depending on the graphic process these run USD$725 to USD$875 (based on todays NZD to USD exchange rate) complete, delivered to you door via Courier. Leadtime is approx 10-14days + freight time.
Cheers
Dave Kay
-
AIR-TASTIC
- Medium Poster
- Posts: 106
- Joined: Sun May 27, 2007 4:56 pm
- Brand Affiliation: None
- Location: Winchester
-
Has thanked:
0
-
Been thanked:
0
Postby AIR-TASTIC » Sun Dec 27, 2009 9:30 am
decay wrote:AIR-TASTIC wrote:
I haven't broken a board to date
I do some loops in lower breezes
Cool - shouldn't need to bump the laminate up more than our standard
AIR-TASTIC wrote:
I use a North Defender board right now
Is that the 150?
AIR-TASTIC wrote:
I will provide my own graphics but they MUST look part of the board, not glued on or resined in
sounds like progress. I understand too, what you are saying about the graphics quality
how is this board in terms of speed and upwind performance, compared tp production boards such as the J&N Chit-Chat??
Well our graphic process is a digital print onto fabric which is laminated into the board as part of the reinforcement. It is about as part of the board as it is possible to get. We do have some technical limits with the process, but we can discuss those in more detail. Our graphics are always a little bit opaque so it is possible to see the wood core thru the graphic. We can provide an outline mask for AI or Corel Draw so you can get the graphic to look right on the final board.
AIR-TASTIC wrote:
I use Rhino 05s but will change to Rebel 10s soon
Rebels are good low end power style of kites, I think I would recommend you onto our Falcata Performance TT, in a 139x41. Depending on the graphic process these run USD$725 to USD$875 (based on todays NZD to USD exchange rate) complete, delivered to you door via Courier. Leadtime is approx 10-14days + freight time.
Cheers
Dave Kay
-
decay
- Frequent Poster
- Posts: 467
- Joined: Sun Oct 20, 2002 1:00 am
- Kiting since: 2000
- Local Beach: Muizenburg, Cape Town
- Favorite Beaches: Ruakaka River Mouth
- Style: ALL
- Gear: Stuff I design
- Brand Affiliation: Lacuna CTO
- Location: Muizenburg, Cape Town
-
Has thanked:
68 times
-
Been thanked:
150 times
-
Contact:
Postby decay » Mon Dec 28, 2009 9:25 pm
how is this board in terms of speed and upwind performance, compared tp production boards such as the J&N Chit-Chat??
I've never even seen a J&N board so can't compare to it I'm sorry, but the Falcata is the most high performance board in our range, designed for freestyle but still easy to use in freeride conditions. It does rock upwind and is fast across the water, but these aren't the primary aims of the design. It pops well, has a low sign weight and lands very smooth.
Cheers
DK
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 146 guests