*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 33 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Mon Jan 25, 2010 7:59 pm 
Offline
Rare Poster

Joined: Fri May 01, 2009 11:44 am
Posts: 15
sure you can!
but an old longboard or malibu might be easier.
Me an a friend of mine just converted two old longboards one broken in half.
One had too much vee and had to have the bottom re shaped but it was easy and fun.
only spent 60 euros yet.
Not tested them yet.
but I bet they will work


Top
Profile
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Tue Jan 26, 2010 2:08 pm 
Offline
Frequent Poster

Joined: Tue Feb 06, 2007 5:50 pm
Posts: 353
How about converting an old piece of foam into a race board?


Top
Profile
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Tue Jan 26, 2010 2:41 pm 
Offline
Rare Poster

Joined: Fri May 01, 2009 11:44 am
Posts: 15
same thing, except you have to shape and glass the entire thing.
You need a big old black thought, because of the zero tail rocker.
if the blanck is to thin and has lots of rocker it may be difficult.

in our case we didn't want to spent too much money and effort on something that could turn out unusable.
We just saw the opportunity and understood that half a long board + fins could work, without a big effort (time + money).

In my friends case:
old longboard, = 0 €
two u.s.box fin boxes (one belonged to the board),= 0€
still doesn't have the fins,but he's looking to find some old ones= 0€
resin for the boxes and inserts = 5€
fibre glass scraps = 0€
3 or 4 hours work
total = 0€ + some work

My case
old snapped malibu = 0 €
two new u.s.box fin boxes ,= 14€
cheap plastic 20 cm fins = 20€
resin for the bottom, boxes and inserts = 15€
fibre glass scraps + bottom (4m 6oz)= 28€
2 roasted chickens for lunch at my friends the other day (we're doing this in his place) =6€
10 (?) total hours work
total = 83€ + some work + plenty of fun

Old blank:
add double the resin , fibre, time and chicken ( more money)
but might even be more fun and end up better.

second hand modern race board= can't find it here yet

new north LTD 2010= 800€ (?)
new rrd krace50= 1400...€!!!!

almost finished...


Last edited by ANTONIO GUARDIOLA on Tue Jan 26, 2010 2:50 pm, edited 1 time in total.

Top
Profile
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Tue Jan 26, 2010 2:46 pm 
Offline
Rare Poster

Joined: Fri May 01, 2009 11:44 am
Posts: 15
it's just a cheap alternative that might work.
and regarding the ws board, the old surfboards have much similar shapes and are lighter.

...and my friends total is 5€ not 0


Top
Profile
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Tue Jan 26, 2010 3:58 pm 
Offline
Frequent Poster

Joined: Tue Feb 06, 2007 5:50 pm
Posts: 353
ANTONIO GUARDIOLA wrote:
it's just a cheap alternative that might work.
and regarding the ws board, the old surfboards have much similar shapes and are lighter.

...and my friends total is 5€ not 0


Sounds cool. Time for some pics, aye?


Top
Profile
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Tue Jan 26, 2010 5:53 pm 
Offline
Rare Poster

Joined: Fri May 01, 2009 11:44 am
Posts: 15
....coming up


Top
Profile
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Tue Jan 26, 2010 8:12 pm 
Offline
Medium Poster

Joined: Tue Jul 01, 2003 5:24 am
Posts: 56
Location: Eastern Canada
ANTONIO GUARDIOLA wrote:
cheap plastic 20 cm fins = 20€


The lateral force on the fins is huge. Last summer, I kept breaking fiberglass fins one after the other that were meant for surf boards and experimentally used on a race board, until they were made in G10. Do not be surprised if you break your fins.

Norm


Top
Profile
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Wed Jan 27, 2010 10:17 am 
Offline
Frequent Poster

Joined: Tue Feb 06, 2007 5:50 pm
Posts: 353
Kite Rider wrote:
ANTONIO GUARDIOLA wrote:
cheap plastic 20 cm fins = 20€


The lateral force on the fins is huge. Last summer, I kept breaking fiberglass fins one after the other that were meant for surf boards and experimentally used on a race board, until they were made in G10. Do not be surprised if you break your fins.

Norm


Norm, is that why they're canted on the race boards?


Top
Profile
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Wed Jan 27, 2010 11:43 am 
Offline
Rare Poster

Joined: Fri May 01, 2009 11:44 am
Posts: 15
thanks kite rider, I'll remember that
if the board works I'll upgrade the fins


Top
Profile
 Post subject: Re: Can you convert an old windsurfer into kite race board?
PostPosted: Wed Jan 27, 2010 1:08 pm 
Offline
Medium Poster

Joined: Tue Jul 01, 2003 5:24 am
Posts: 56
Location: Eastern Canada
HAMLINDP wrote:
Kite Rider wrote:

The lateral force on the fins is huge. Last summer, I kept breaking fiberglass fins one after the other that were meant for surf boards and experimentally used on a race board, until they were made in G10. Do not be surprised if you break your fins.

Norm


Norm, is that why they're canted on the race boards?


I am no expert on the topic, but I'd say no. I am under the impression that the cant on the fins is to allow to ride the board with an angle relative to the water, like as with a twin-tip board, hence the toe-side fins are not as much in the water, therefore generating less resistance to forward movement. The amount of cant is personal preference and imposed by intended design of either the fin boxes or the fins themselves.

Personally, I prefer less than more, so I can ride the board flatter. For instance, my main race board has US-type fin boxes with virtually no cant. It tracks super-well close hauled and beam reach but is not as stable when sailing broad reach. I think boards with more fin angle track less close hauled well but are more stable on broad reach. A race board designer once told me that I cannot have it all, it is a question of compromise. Read Stance on race board for my impression of different boards with different cants.

Norm


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 33 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group