Dumb newby questions

[2tall]

Hey guys...awesome forum...I've read most of the threads and done a bunch of research.

Ready to build my first board ...kiting for awhile, and just not perfectly happy w/production boards, plus it just sounds great to rip on something you made.

Planning on using foam core at first:

1. Do you lay up the fabric and epoxy on just one side at a time...can't tell from pics/videos, or do you do both sides at the same time and vacuum bag on the rocker table?

2. Do you bond the ABS rails to the foam before glassing? What do you use to bond the ABS to the foam?

Thanks for the help...I'm sure I'll have more questions down the road.

[dr.lojz]

Hey guys...awesome forum...I've read most of the threads and done a bunch of research.
Ready to build my first board ...kiting for awhile, and just not perfectly happy w/production boards, plus it just sounds great to rip on something you made.
Planning on using foam core at first:
1. Do you lay up the fabric and epoxy on just one side at a time...can't tell from pics/videos, or do you do both sides at the same time and vacuum bag on the rocker table?
2. Do you bond the ABS rails to the foam before glassing? What do you use to bond the ABS to the foam?
Thanks for the help...I'm sure I'll have more questions down the road.

Mahalo,
Use help of uncle Google and take a look on this page
http://freespace.virgin.net/cav.labs/
Hope this will clear you some questions!
dr.

[gbleck]

I think you have to flame the rails before puting them on with a torch or they won't bond fully. Lightly heat them with a torch.

[2tall]

Hey guys...awesome forum...I've read most of the threads and done a bunch of research.
Ready to build my first board ...kiting for awhile, and just not perfectly happy w/production boards, plus it just sounds great to rip on something you made.
Planning on using foam core at first:
1. Do you lay up the fabric and epoxy on just one side at a time...can't tell from pics/videos, or do you do both sides at the same time and vacuum bag on the rocker table?
2. Do you bond the ABS rails to the foam before glassing? What do you use to bond the ABS to the foam?
Thanks for the help...I'm sure I'll have more questions down the road.

Mahalo,
Use help of uncle Google and take a look on this page
http://freespace.virgin.net/cav.labs/
Hope this will clear you some questions!
dr.

Thanks...I've looked at that site for great info. A couple questions still...

1. He wasn't vacuum bagging, and I am still curious to know if you lay up one side at a time when vacuum bagging?

2. He uses PVC for rail instead of ABS, does that change the technique?j

Thanks again for the help...about ready to build the first board.

[zob]

Here is How to make an anjustable rocker table and a discusion about vacuum forming and sendwich construction
I realised a lot of old links, I learned on, are not working, also clips on youtube are removed!?!?!?

Might come in handy to: http://www.kite-stuff.org/forum/index.php?c=3