Contact   Imprint   Advertising   Guidelines

honeycomb core ?

here you can exchange your experience and datas about your home build boards


bisdremis
Rare Poster
Posts: 46
Joined: Thu Feb 04, 2010 2:19 pm
Kiting since: 2009
Local Beach: agelohori
Favorite Beaches: kerros, prassonisi, rahhes
Gear: swithcblade ids
Brand Affiliation: None

honeycomb core ?

Postby bisdremis » Sun May 02, 2010 11:42 am

hello everybody , as been new to the field , i have some questions about the use of honeycomb as core material
1) has enyone ever used honeycomb ( paper ,glass ) as core material?
2) if so, how it behaves ,flex , what should i be aware of , any lings ?
3) any other core material sugestions
thanks in advance

User avatar
Bigdog
Very Frequent Poster
Posts: 561
Joined: Mon Jul 26, 2004 6:50 pm
Kiting since: 1999
Local Beach: Brown's Bay Wolfe Island
Brand Affiliation: None
Location: Wolfe Island Canada
Contact:

Re: honeycomb core ?

Postby Bigdog » Sun May 02, 2010 12:43 pm

Honeycomb has been used and has good characteristics but has some difficulties for small scale. Its is more difficult to shape for one. Secondly you just cannot lay cloth to it and wet out like you can on a foam core.


My suggestion is to use 5 to 6lb density foam core like corecell. Also quite common is to use wood strips built up like a snowboard core. Lots of option easier than honeycomb.


Good Luck
Stan

Unikis
Rare Poster
Posts: 8
Joined: Thu May 21, 2009 9:03 pm
Kiting since: 2006
Local Beach: Baltic sea- Latvia's coast
Favorite Beaches: Baltic sea- Latvia's coast- Lilaste, Vitrupe, Ventspils, Jūrkalne
Style: Freeride, oldschool
Gear: Kite- North Rebel '08 12m, board- North Jaimie Pro '07
Brand Affiliation: North, Ion, Dakine

Re: honeycomb core ?

Postby Unikis » Tue May 18, 2010 8:42 pm

I have thought about drilling a lot of wholes in wood core. It would make core lighter and look like honeycomb ;) But I still have not tried. Has anyone? ;)

BWD
Very Frequent Poster
Posts: 2819
Joined: Thu Jun 05, 2003 3:37 am

Re: honeycomb core ?

Postby BWD » Wed May 19, 2010 3:20 am

I have a core I made of birch plywood, with about 500 holes in it.
It took half a day and 2 router bits to cut, and it's far from perfect.
I think it is better to use lighter wood or foam.... ...maybe....


Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 2 guests