*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 11 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: How-to Video for Boardbuilding
PostPosted: Sun Jun 27, 2010 12:30 pm 
Offline
Frequent Poster
User avatar

Joined: Tue Jan 02, 2007 11:50 pm
Posts: 261
Location: Ottawa, Canada
Hi guys, I finally got around to putting together a video of the way I've been building boards for the past 4 years or so. Not the only way to do it, but should be good for those getting started

Poured rails and the core shape



The rocker table



Glassing and vacuum bagging and finishing



Hope it helps!
Peter


{ SHARE_ON_FACEBOOK } { SHARE_ON_TWITTER } { SHARE_ON_ORKUT } { SHARE_ON_DIGG } { SHARE_ON_MYSPACE } { SHARE_ON_DELICIOUS }
Top
Profile
 Post subject: Re: How-to Video
PostPosted: Sun Jun 27, 2010 1:51 pm 
Online
Frequent Poster
User avatar

Joined: Mon Jul 26, 2004 6:50 pm
Posts: 429
Location: Wolfe Island Canada
Peter
Good job on the video! That will really help any newbie builders.
Stan


Top
Profile
 Post subject: Re: How-to Video for Boardbuilding
PostPosted: Sun Jun 27, 2010 4:18 pm 
Offline
Rare Poster

Joined: Wed Dec 31, 2008 8:33 pm
Posts: 30
Cool, thanks!

Videos just make some of the steps so much easier to understand for us newbies. :D

Nice job.


Top
Profile
 Post subject: Re: How-to Video for Boardbuilding
PostPosted: Sun Jun 27, 2010 5:49 pm 
Offline
Frequent Poster
User avatar

Joined: Tue Jan 02, 2007 11:50 pm
Posts: 261
Location: Ottawa, Canada
Hi Stan. I've learned more about kiteboard building from Stan than anyone else out there. Hope to catch a session on your island this summer Stan!

Peter


Top
Profile
 Post subject: Re: How-to Video for Boardbuilding
PostPosted: Sun Jun 27, 2010 7:03 pm 
Offline
Very Frequent Poster

Joined: Sun Feb 04, 2007 10:48 pm
Posts: 1230
Good call, thanks for posting. I've bookmarked it for the future.

With the cost of new boards I think I'll be turning to home made boards soon... unless of course I get a job or win the lottery. I've had good success with my first light wind ply board. It's still going strong and works beautifully (which I still can't believe).

Given the simple shapes of some of the TT's out there I think making a board for moderate to strong winds might be just as successful. I currently use an 09 LF recoil which looks pretty simple, not much concave (if any) and simple straight forward rocker, thin edges. I'm sure I could make one just as light, with similar edges and probably even more flex.


Top
Profile
 Post subject: Re: How-to Video for Boardbuilding
PostPosted: Sun Jun 27, 2010 9:51 pm 
Online
Frequent Poster
User avatar

Joined: Mon Jul 26, 2004 6:50 pm
Posts: 429
Location: Wolfe Island Canada
Hey Pete
Ya let me know and we can do Big Sandy if its crankin.

Stan


Top
Profile
 Post subject: Re: How-to Video for Boardbuilding
PostPosted: Mon Jun 28, 2010 12:49 pm 
Offline
Frequent Poster
User avatar

Joined: Tue Jan 02, 2007 11:50 pm
Posts: 261
Location: Ottawa, Canada
Hey Frankm, you can be sure that a board made the wayI do it will be lighter than every production board on the market. Adding the cotton does add a bit, but it's still lighter. But, I've yet to have me or anyone else doing huge megaloops or pushing it to the level of the top few percent of riders. No broken boards yet. Also production boards might be tougher than my layup if you hit rocks and things like that.

Yeah Stan, we're always watching the forecast. Almost went to Sandbanks this morning by the forecast backed off a lot.

Pete


Top
Profile
 Post subject: Re: How-to Video for Boardbuilding
PostPosted: Tue Jul 06, 2010 2:49 pm 
Offline
Rare Poster

Joined: Sun Sep 07, 2008 11:14 pm
Posts: 25
the videos were very cool.i learnt so much
some qs.where can i print graphics with cotton material can i do it home?
can i put the cotton graphics on the bottom?
how did u made the rocker table?
if i wanna use a single to double concave on the bottom how i will do it?


Top
Profile
 Post subject: Re: How-to Video for Boardbuilding
PostPosted: Sat Jul 10, 2010 2:05 am 
Offline
Frequent Poster
User avatar

Joined: Tue Jan 02, 2007 11:50 pm
Posts: 261
Location: Ottawa, Canada
No idea about printing on cotton - just go hunt through the discount bin at the local fabric shop. There's usually a lot there.

Sure, cotton on the bottom should work, but it does add more weight, so I've only done it on top.

The rocker table is just an outer rectangle with a lot of cross pieces from side to side and they support the big flat piece of wood, which the plexi sits on. Some guys have it all adjustable. I just use shims to change the height and screw down through the shims to hold it in place. You can screw or bolt the frame together in many different ways.

Single to double concave?? Not sure, that sounds like it is a lot more complicated than the method I'm using. Maybe if you glued to the plexi in the middle and held it down in the middle somehow, then supported it further out with the long wood strip that gives the concave it might work. Sounds like too much trouble to me!

Has anyone here ever tried making 2 identical boards but one with a single concave and one with a double concave? I'd be interested to hear if it is more than just fashion. :)

Peter


Top
Profile
 Post subject:
PostPosted: Sat Feb 19, 2011 2:29 pm 
Offline
Frequent Poster
User avatar

Joined: Thu Oct 18, 2007 7:30 pm
Posts: 468
Location: Denmark, Frederiksværk
Nice. Good inspiration :)


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 11 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group