Contact   Imprint   Advertising   Guidelines

paint for epoxi

Here you can exchange your experience and datas about your home build boards
rastawhite
Rare Poster
Posts: 2
Joined: Thu Apr 30, 2009 10:07 am
Local Beach: lagoa de albufeira
Style: old school
Gear: slingshot rev-7,11
crazifly raptor 132*41
cyclone 6´´1
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

paint for epoxi

Postby rastawhite » Wed Jan 12, 2011 12:22 am

hi, can someone tell me what is the best type of paint for epoxy?
i want to paint my new twintip and don´t know wich type is better, :?: :?: :?:
good winds
pedro :kiff:

User avatar
zob
Frequent Poster
Posts: 476
Joined: Tue Feb 24, 2009 1:43 pm
Local Beach: Grado Pineta (IT), Fossalon (IT)
Style: Freeride, strapless hooked-in
Gear: FS S3 19m2 DLX, S3 CE 12m2 DLX & S4 8m2 DLX
Homemade Surf & Snow Boards
MBS Pro90
Location: Iv.G.-Slovenia
Has thanked: 21 times
Been thanked: 3 times
Contact:

Re: paint for epoxi

Postby zob » Wed Jan 12, 2011 9:37 am

I mix pigments for colouring epoxy. You get nice transparent/colored laminate, althow core can be seen, but that's not necessarilly a bad thing. :wink:

rastawhite
Rare Poster
Posts: 2
Joined: Thu Apr 30, 2009 10:07 am
Local Beach: lagoa de albufeira
Style: old school
Gear: slingshot rev-7,11
crazifly raptor 132*41
cyclone 6´´1
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: paint for epoxi

Postby rastawhite » Wed Jan 12, 2011 10:40 pm

hi,zob
thanks for the reply, but that i allready do , i think that i will try with auto paint for some nice skethes and then hot coat or varnish,i will try to put some fotos when it´s done
:pump:

User avatar
JellyfishboardsT
Rare Poster
Posts: 10
Joined: Tue Nov 16, 2010 2:36 am
Local Beach: Kettlepoint, Grand Bend, Lake Huron
Style: Free Ride
Gear: Jellyfishboards and Epic Kites
Brand Affiliation: Jellyfishboards, Epic Kites
Location: Ontario Canada
Has thanked: 0
Been thanked: 0
Contact:

Re: paint for epoxi

Postby JellyfishboardsT » Thu Jan 13, 2011 12:38 pm

you will be fine with any auto paint... just make sure you de greese it first... Prep is the biggest thing in any paint job...

I been useing house of Kolors for years on jet skis, motorcycles and kite boards. With a good slow cure clear coat with UV blocker in in... Or add some flex additive to the clear...
( fast drying clear , will be hard and britial)

Terrie
www.jellyfishboards.com
Attachments
Terrie  Newstick.jpg
Terrie Newstick.jpg (63.32 KiB) Viewed 1845 times


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 152 guests