Here you can exchange your experience and datas about your home build boards
-
gbleck
- Very Frequent Poster
- Posts: 546
- Joined: Mon Oct 08, 2007 4:39 am
-
Has thanked:
0
-
Been thanked:
0
Postby gbleck » Tue Feb 22, 2011 9:19 pm
Nice look. Cast epoxy rails or high density poly urithane? I love the graphics. Some sort of printed plastic or less exotic?
-
TakeFlight
- Medium Poster
- Posts: 69
- Joined: Mon Jan 16, 2006 12:44 am
- Brand Affiliation: None
- Location: US
-
Has thanked:
0
-
Been thanked:
0
Postby TakeFlight » Tue Feb 22, 2011 9:42 pm
This one is Just a Divincell H80 3/8" Foam Core. I have done wood cores and Hybrid wood/foam and they are all made the same. Cast epoxy and Micorpheres for the rails. Graphix... vehicle wrap. I also have the same place print graphix on cotton for layup under my fiberglass but this one is just wrapped and then clearcoated.
-
nicorette
- Rare Poster
- Posts: 4
- Joined: Mon Feb 21, 2011 8:16 am
- Local Beach: Lola
- Favorite Beaches: Packery Chanel, Shamrock Island, Lola Johnson, Nighthawk
- Style: Freestyle
- Gear: Brokite
- Brand Affiliation: Brokite
-
Has thanked:
0
-
Been thanked:
0
Postby nicorette » Tue Feb 22, 2011 10:13 pm
nice board brah. similar to a brokite but with fancy graphics.
-
Larse
- Frequent Poster
- Posts: 482
- Joined: Thu Oct 18, 2007 7:30 pm
- Local Beach: Lynæs , DK
http://www.KiteboardingExercises.com
- Favorite Beaches: Poppelvej, DK
http://www.KiteboardingExercises.com
- Style: Wakestyle/freestyle
- Gear: LF Nirvana, Envy, LF DLX and LF LFX
- Brand Affiliation: Liquid Force and http://www.KiteboardingExercises.com
- Location: Denmark, Frederiksværk
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby Larse » Tue Apr 19, 2011 11:45 am
How did you do the rails? I'm building a board right now and I'm not totally sure on the rails. I'm building a carbon board and want to make a poured epoxy rail for it, like you did. When I cut out the woodcore I'll save the "left over wood" and use it as a mould. I'll then cut of 0,5mm of the board and then fill the gab with epoxy. So I think, I got that covered. But afterwards what then? Can I just cut of the rest of the carbon and sand it down to make a smooth rail?
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 97 guests