Contact   Imprint   Advertising   Guidelines

A Big Door - 166x50

Here you can exchange your experience and datas about your home build boards
duartemv
Rare Poster
Posts: 18
Joined: Mon Jun 15, 2009 6:45 pm
Local Beach: Portugal
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

A Big Door - 166x50

Postby duartemv » Thu Apr 21, 2011 3:52 pm

So... after some friendly discussions with kite buddies, I finally got to the conclusion that what I need is not a big kite, but a big board!!

I'm 1,78m and 73Kg, and the biggest kite I have is an Advance Kaiman 10m, and the board is a 133x38.

After a weekend of 12kn, where my board proofed itself insufficient, while a Spleene Door of 145x45 was more than enough to make it upwind, I decided to make my own, but using the outline of the Spleene Monster Door, of 166x50!! :D

Me and a friend bought some ply wood 6,5mm thick and put ourselves to work!
Each of us is making a different approach, we I've decided to cut the plank into several planks, and glue them together, while he is making it from the complete plank.

After a few weeks of on and off due to time issues, I finally got the board ready for lamination.

As you'll be able to see from the pics, I don't even have a garage to work in, so everything was done on the balcony of my building! :D

Here are a few pics of its current state!
DSCF8178 [800x600].jpg
Selection of plank orders!
DSCF8178 [800x600].jpg (51.25 KiB) Viewed 3916 times
DSCF8194 [800x600].jpg
Gluing the planks.
DSCF8194 [800x600].jpg (58.12 KiB) Viewed 3916 times
DSCF8196 [800x600].jpg
Drying the glue.
DSCF8198 [800x600].jpg
Drawing the outline.
DSCF8198 [800x600].jpg (42.86 KiB) Viewed 3916 times
DSCF8207 [800x600].jpg
Shape cut out and starting to sand down the thickness.
DSCF8207 [800x600].jpg (52.26 KiB) Viewed 3916 times
DSCF8208 [800x600].jpg
No router available... took a little bit of extra time with this one...
DSCF8297 [800x600].jpg
After a few hours, the top side!
DSCF8297 [800x600].jpg (61.29 KiB) Viewed 3916 times
DSCF8298 [800x600].jpg
And the bottom side!
DSCF8298 [800x600].jpg (62.49 KiB) Viewed 3916 times
DSCF8299 [800x600].jpg
Detail of the bottom central and lateral channels.
DSCF8300 [800x600].jpg
Detail of the top side.
Next steps will consist of making a poured epoxy rail. I've saved the exterior outline of the wood, and after that, lamination. 2 layers of 6 ounce fiber glass on top and bottom sides, with some carbon strips along the length of the board, especially through the heel positions and side channels.

Hubbs
Medium Poster
Posts: 64
Joined: Mon Jul 27, 2009 8:06 pm
Local Beach: Conrad's Beach
Clam Harbour Beach
Style: Freestyle
Gear: Ozone - 8m Frenzy
Ozone - 4m Access
Flex Deck
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: A Big Door - 166x50

Postby Hubbs » Sun Apr 24, 2011 8:45 pm

:thumb: Looks sweet man, nice pics too, really helps with learning

Im just starting to look at board building for a little something to do on the side, and making a Door was JUST what I was thinking, i a nice low wind board to help me out,

looking forward to checking out the updates, gonna book mark this to help me get started on mine

Good luck man cant wait to see the results
:jump:

duartemv
Rare Poster
Posts: 18
Joined: Mon Jun 15, 2009 6:45 pm
Local Beach: Portugal
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: A Big Door - 166x50

Postby duartemv » Mon Apr 25, 2011 10:05 am

Just a little update... After cutting the board, its weight was around 2,6Kg. After removing all that volume, the wood core is around 2Kg.

duartemv
Rare Poster
Posts: 18
Joined: Mon Jun 15, 2009 6:45 pm
Local Beach: Portugal
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: A Big Door - 166x50

Postby duartemv » Thu May 12, 2011 5:00 pm

A little big problem occurred with the core, due to excessive humidity...

Basically, it's split in half along the length, and it's a bit twisted... Because it's nearly impossible to put it back together with my skills and tools, I've decided to put it aside and start a new core, with a different approach, not so time consuming.

I'll start working on it next and update this post as soon as I have it up and running!

User avatar
Pablo
Frequent Poster
Posts: 234
Joined: Sun Dec 15, 2002 1:00 am
Brand Affiliation: None
Location: Argentina
Has thanked: 0
Been thanked: 0

Re: A Big Door - 166x50

Postby Pablo » Thu May 12, 2011 10:10 pm

why did you cut it into strips?

duartemv
Rare Poster
Posts: 18
Joined: Mon Jun 15, 2009 6:45 pm
Local Beach: Portugal
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: A Big Door - 166x50

Postby duartemv » Fri May 13, 2011 2:01 pm

This technique is used to limit the damage to the board in case it brakes inside. If one of the strips brakes, it wont propagate through the entire board. This way, the board will last a little bit longer. :)

duartemv
Rare Poster
Posts: 18
Joined: Mon Jun 15, 2009 6:45 pm
Local Beach: Portugal
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: A Big Door - 166x50

Postby duartemv » Fri May 13, 2011 2:04 pm

I got a question regarding the epoxy resin.

Does the epoxy resin sticks to plastic bags if I don't use that special unmolding wax?!

In a few days I'll start the lamination of the board, without vacuum bagging, so I'm thinking in covering the table with a plastic for protection, I to prevent the board from gluing to the table. Can I do this?!

User avatar
zob
Frequent Poster
Posts: 476
Joined: Tue Feb 24, 2009 1:43 pm
Local Beach: Grado Pineta (IT), Fossalon (IT)
Style: Freeride, strapless hooked-in
Gear: FS S3 19m2 DLX, S3 CE 12m2 DLX & S4 8m2 DLX
Homemade Surf & Snow Boards
MBS Pro90
Location: Iv.G.-Slovenia
Has thanked: 21 times
Been thanked: 3 times
Contact:

Re: A Big Door - 166x50

Postby zob » Fri May 13, 2011 2:45 pm

I do it, with ordinary PVC sheet.


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 137 guests