Contact   Imprint   Advertising   Guidelines

Vaccum from a compressor

here you can exchange your experience and datas about your home build boards


ANC
Rare Poster
Posts: 6
Joined: Wed Aug 08, 2007 3:55 pm
Kiting since: 0
Brand Affiliation: None
Location: Rugby, England

Vaccum from a compressor

Postby ANC » Sun Sep 11, 2011 7:22 pm

Has anyone tried one of these to generate a vaccum from a compressor?
Does it generate enough negative pressure?
http://www.polyfibre.co.uk/index.php?sec=prod&prod=231

on holiday
Rare Poster
Posts: 5
Joined: Wed Sep 09, 2009 5:57 pm
Kiting since: 1999
Brand Affiliation: None

Re: Vaccum from a compressor

Postby on holiday » Mon Sep 12, 2011 8:07 pm


Fullwatts
Rare Poster
Posts: 4
Joined: Tue Sep 06, 2011 10:30 am
Kiting since: 0
Local Beach: Kanaha
Brand Affiliation: None

Re: Vaccum from a compressor

Postby Fullwatts » Thu Sep 15, 2011 9:17 am

Never tried a venturi vacuum pump. I have used a rotary vane pump, basically the ones used by auto shops to evacuate A/C systems in cars. Quiet and works really well, you can get a full 28mmhg no problem. Not too expensive either, you can get a decent one for under a hundred bucks. Most auto parts stores will carry them. Here's an example. I'm not endorsing this specific pump, just showing you the type I'm referring to. http://www.amazon.com/FJC-6905-Vacuum-Pump-1-5/dp/B002DMZA2G/ref=sr_1_3?ie=UTF8&qid=1316073771&sr=8-3


Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 1 guest