Here you can exchange your experience and datas about your home build boards
-
laz
- Very Frequent Poster
- Posts: 882
- Joined: Thu Jan 05, 2006 5:11 am
-
Has thanked:
0
-
Been thanked:
0
Postby laz » Mon Oct 10, 2011 9:52 pm
Where can I order sheets of pvc for board building. I need somewhere with the special kind of pvc that will stick to the epoxy also it is being layed over carbon fiber. With ABS rails. If I find a source I like I will buy bulk.
Thx for any help. I can't seem to find any.
-
handy
- Medium Poster
- Posts: 161
- Joined: Thu Apr 10, 2008 3:49 pm
- Gear: wave
- Brand Affiliation: ahcustoms.ch
-
Has thanked:
0
-
Been thanked:
29 times
-
Contact:
Postby handy » Mon Oct 10, 2011 10:33 pm
-
gbleck
- Very Frequent Poster
- Posts: 546
- Joined: Mon Oct 08, 2007 4:39 am
-
Has thanked:
0
-
Been thanked:
0
Postby gbleck » Tue Oct 11, 2011 12:33 am
Is this henry's kiteforum account? I got my H80 divinicel from Jamestown distributors on the east coast. Good stuff but if you want it in the full 8 foot by 4 foot it's freight shiping and that can add up. Buying bulk could decrease that so if this is Henry I'd be in if you find someplace to order from and want to split shiping. I can haul an 8x4 on my roof rack now. You save a bit on shiping if you go to a comercial adress or to the shiping center.
-
laz
- Very Frequent Poster
- Posts: 882
- Joined: Thu Jan 05, 2006 5:11 am
-
Has thanked:
0
-
Been thanked:
0
Postby laz » Tue Oct 11, 2011 9:48 pm
Yea this is Henry
. I'm actually posting this for jeff because he doesn't have an account but yeah we probably would be down to split shipping etc. if we find a source he likes.
-
gbleck
- Very Frequent Poster
- Posts: 546
- Joined: Mon Oct 08, 2007 4:39 am
-
Has thanked:
0
-
Been thanked:
0
Postby gbleck » Tue Oct 11, 2011 10:29 pm
Nice.
-
laz
- Very Frequent Poster
- Posts: 882
- Joined: Thu Jan 05, 2006 5:11 am
-
Has thanked:
0
-
Been thanked:
0
Postby laz » Thu Oct 13, 2011 1:47 am
Actually we need PBT top and bottom sheets with graphics and remay backing
Anyone know sources?
-
gbleck
- Very Frequent Poster
- Posts: 546
- Joined: Mon Oct 08, 2007 4:39 am
-
Has thanked:
0
-
Been thanked:
0
Postby gbleck » Thu Oct 13, 2011 3:02 am
Only PBT I found are skiny snow board widths. Checked the guy's that do the boat graphics but no joy.
-
laz
- Very Frequent Poster
- Posts: 882
- Joined: Thu Jan 05, 2006 5:11 am
-
Has thanked:
0
-
Been thanked:
0
Postby laz » Sat Sep 08, 2012 6:30 am
So nobody knows where to order plastic sheets that work for board building?
How does Hana Crew, Bro Kite, Underground FLX boards get their materials. There has to be a source or are they using a different epoxy. Whats up? Thanks
-
noody
- Medium Poster
- Posts: 100
- Joined: Sat Sep 04, 2004 4:23 pm
- Brand Affiliation: None
- Location: Pembrokeshire. West Wales. UK
-
Has thanked:
0
-
Been thanked:
0
Postby noody » Sat Sep 08, 2012 9:25 am
Hana Crew building boards again ? What's the story please. I still have one over from my original collection created when Dimitri was involved. Didn't the shaper blow a knee so the whole thing stopped.
Come-on, get me up to speed, i've been under a stone.
-
gbleck
- Very Frequent Poster
- Posts: 546
- Joined: Mon Oct 08, 2007 4:39 am
-
Has thanked:
0
-
Been thanked:
0
Postby gbleck » Sun Sep 09, 2012 4:19 am
I got my 1/4 inch divinycell h80 from jamestown distributors. Good stuff but air shipping was not cheap. I think I need 1/8 inch to sandwich my next eps build. They have core cell in that thickness. I have most of a sheet of black abs left if your interested. If we split a shipment and deliver to a comercial address with a loading dock or pick up at a FedEx freight location shipping should be less. Im going to be at Zion riding tomorrow. Hope to see you.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 160 guests