|
| Author |
Message |
|
KAWIKA
|
Post subject: Re: Cheap, durable raceboard. Posted: Thu Sep 22, 2011 3:30 am |
|
 |
| Frequent Poster |
 |
Joined: Mon Jan 30, 2006 2:25 am Posts: 286
|
TooMuchEpoxy wrote: Good lord that's tempting. I just might say screw the fleet, i'm gettin the kite AND the board. That puts cabrinha in the realm of possibility, however, I'd have a hard time building a fleet with that setup, but I'd never have to complain about the breeze again. As long as there's enough to hot launch...
I'd still rather someone come out with a sub $1000 board and just get the switch Nitro 14 that way i could get others on the bandwagon...
Considering this tho... Switch 14 in light east wind in Jupiter 9-13 mph I can only imagine what it can do on a lake like Crandon with a race board http://youtu.be/7urqF_G52dI
|
|
| Top |
|
 |
|
TooMuchEpoxy
|
Post subject: Re: Cheap, durable raceboard. Posted: Thu Sep 22, 2011 6:31 pm |
|
 |
| Medium Poster |
Joined: Thu Mar 24, 2011 2:09 pm Posts: 111
|
|
Now that I've got this cabrinha 183 do i need to upgrade my fins? Stock are 26, 24 i think. Glass with carbon/kevlar overlay(Wish I had G10) Not Terribly impresive both on durability and quality...
|
|
| Top |
|
 |
|
experienced1
|
Post subject: Re: Cheap, durable raceboard. Posted: Thu Sep 22, 2011 6:58 pm |
|
 |
| Very Frequent Poster |
Joined: Fri Jun 06, 2003 5:32 pm Posts: 765 Location: Calif. Mfg Rep
|
|
they also come with 29s and 26s....maybe you can swap if y=you haven't used. still nice fins to get the feel of racing and as I think I indicated previously, one racer at the Cabrinha Race Series finished 7th of 8th overall on the stock fins. If you get more serious about racing, maybe you already are, you will need to upgrade the fins.
Paulo of Rista fins is very familiar with the board and Cabrinha XB and has made great G10 fins for it...the angle of the front fins is as important as the size.
Tectonic also makes fins for that board that work great...the Talons or the Gullwings...
ALL are not inexpensive might also want to contact Adventure sports miami and see if they can put you in touch with Patrick or Damo...they might have a used set of fins for hyou steve
|
|
| Top |
|
 |
|
TooMuchEpoxy
|
Post subject: Re: Cheap, durable raceboard. Posted: Thu Sep 22, 2011 7:10 pm |
|
 |
| Medium Poster |
Joined: Thu Mar 24, 2011 2:09 pm Posts: 111
|
|
Might stick with these fins for now. Fins are expensive...
|
|
| Top |
|
 |
|
patrickrynne
|
Post subject: Re: Cheap, durable raceboard. Posted: Thu Sep 22, 2011 7:43 pm |
|
 |
| Medium Poster |
Joined: Fri Apr 30, 2010 12:50 am Posts: 73
|
upgrading the fins really depends on what you're trying to get out of the board. If you are mostly freeriding, than the stock fins will work fin and might make the raceboard learning curve a bit easier. If you want to maximize the performance of the 183, you'll want to get some good G10 fins in the ballpark of 34cm long front, 28-29cm long rears (running the standard quad configuration). The chord length at the base should be around 9-11cm...10cm is most common. The cant angle of the front should be about 6-7 degrees. The rears should be straight. Rake angle is about 10 degrees. if you have no idea what i am talking about, check here http://kiteracing.com/Fin_Terms.htmlThese bigger fins will allow the board to heel to leeward more and really let you drive upwind. Downside is that they are bit harder to ride and take getting used to, but once you do, you'll never go back. We might have some prototypes available in that size but i'd need to check. If i run across something I will post it here. have fun! -patrick
|
|
| Top |
|
 |
|
Peter_Frank
|
Post subject: Re: Cheap, durable raceboard. Posted: Thu Sep 22, 2011 8:58 pm |
|
 |
| Very Frequent Poster |
 |
Joined: Wed Oct 16, 2002 1:00 am Posts: 4792 Location: Denmark
|
TooMuchEpoxy wrote: Might stick with these fins for now. Fins are expensive... Just keep those fins - they are A Okay Only thing you might consider - is to get seaweed fins, if you HAVE any grass in the water ? It will be  otherwise... But those fins are way more difficult to get - but no matter how costly, they are worth it - as you will be able to ride so much more relaxed and performant, if you got seaweed  Peter
|
|
| Top |
|
 |
|
PeterP
|
Post subject: Re: Cheap, durable raceboard. Posted: Fri Dec 02, 2011 6:52 pm |
|
 |
| Medium Poster |
Joined: Thu Jul 14, 2005 10:38 am Posts: 196
|
|
We've now been racing the Sector 60 One Design in six races here in Cape Town and the results have been quite phenomenal - 2 race wins and on the podium with one or two boards in all races. This against North and and Cabrinha raceboards.
The Sector One Design has brought fun back into racing here as we are not only dicing for the lead in stronger winds but have some cool close racing amongst ourselves on the Sectors. Board is so easy to use, you rock up and go, no need to fiddle with fins - the guys have tried, standard set-up works better.
So to answer first guys question - Sector is a great affordable competitive raceboard which offer free-ride qualities and is dead easy to use.
|
|
| Top |
|
 |
|
eree
|
Post subject: Re: Cheap, durable raceboard. Posted: Fri Dec 02, 2011 7:25 pm |
|
 |
| Very Frequent Poster |
Joined: Sun Jul 13, 2008 9:49 am Posts: 777 Location: shallow sea
|
|
is that a thread about this joke when you want three qualities, but can get only two of them at a time? cheap - durable - race
1st choice: cheap + durable, but not a raceboard. 2nd choice: durable + race, but not cheap. 3rd choice: cheap + race, but not durable.
|
|
| Top |
|
 |
|
davesails7
|
Post subject: Re: Cheap, durable raceboard. Posted: Fri Dec 02, 2011 7:33 pm |
|
 |
| Very Frequent Poster |
 |
Joined: Sun Apr 01, 2007 7:36 pm Posts: 696
|
|
How many people are in the races?
Is the Sector One Design available now or are you talking about the standard Sector 60 V2?
What size fins does the board come with?
|
|
| Top |
|
 |
|
PeterP
|
Post subject: Re: Cheap, durable raceboard. Posted: Sat Dec 03, 2011 6:21 am |
|
 |
| Medium Poster |
Joined: Thu Jul 14, 2005 10:38 am Posts: 196
|
|
We have about 20 odd racers every week - which is down from previous years where we had up to 40. We're hoping the One Design will rekindle some interest.
The Sector 60 One Design is the same as the Sector 60 V2 and it comes with 22 and 24cm fins.
There are fleets developing in Spain and Australia and other pockets from what I've heard and there is supposed to be a World Champs One Design event some time as well.
|
|
| Top |
|
 |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|