Contact   Imprint   Advertising   Guidelines

Best surfboard shape/fins/thickness for upwind?

Forum for kitesurfers
JollyGreen
Rare Poster
Posts: 45
Joined: Wed Oct 12, 2011 6:52 am
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Best surfboard shape/fins/thickness for upwind?

Postby JollyGreen » Tue Jan 10, 2012 6:56 am

Aside from raceboards, what's the best surfboard for getting upwind? I have an underground twintip 148x46cm and I think it can go upwind better than most surfboards even in the lightest winds. I want to ride some small waves and mostly practice carves, toeside, and transitions with some small wave riding. Looking for a general idea of what to look for so I can go hunt around the surfboard shops here and try and find something that might work.

FarQueLot
Medium Poster
Posts: 167
Joined: Sun Dec 26, 2004 2:37 am
Gear: Ozone,Slingshot,my own
Brand Affiliation: None
Location: Labia
Has thanked: 0
Been thanked: 0

Re: Best surfboard shape/fins/thickness for upwind?

Postby FarQueLot » Tue Jan 10, 2012 9:45 am

Had a Slingshot Celeritas that was my best upwind board but preferred the SST for down wind riding these where 2008 / 2010 but that style of board is still current.
The Celeritas was an easy board to ride and felt great strapped and unstrapped- do miss it and will buy another.
Few others out there that will work well but the perfect board is blend of things that each rider feels important.

User avatar
tautologies
Very Frequent Poster
Posts: 10865
Joined: Mon Feb 16, 2004 5:36 am
Brand Affiliation: None
Location: Oahu
Has thanked: 100 times
Been thanked: 156 times
Contact:

Re: Best surfboard shape/fins/thickness for upwind?

Postby tautologies » Tue Jan 10, 2012 10:17 am

Nope :D Big wide surfboard with big fins will take any TT any day. Key will be wide tail, good thickness for flotation and big fins for upwind drive.

Might not be the best surfboard, but will definitely take out any TT> Actually most surfboards with wide-ish tail will win upwind battles against TTs.

User avatar
Starsky
Very Frequent Poster
Posts: 4373
Joined: Mon Apr 19, 2004 12:12 pm
Brand Affiliation: None
Location: Ontario
Has thanked: 0
Been thanked: 3 times

Re: Best surfboard shape/fins/thickness for upwind?

Postby Starsky » Tue Jan 10, 2012 1:44 pm

For sure width, rocker and fins are key, where more width, less rocker and more fin = easier upwind/low wind.

Have seen a few guys from around here up in the great lakes pick up surfboards while down in hatteras and be sorely dissapointed in the low end when they get back here. Problem is they picked up a shortboard template. Something like this
63_Chilli_Flexlite_ezr.jpg
63_Chilli_Flexlite_ezr.jpg (6.42 KiB) Viewed 3014 times
Pretty narrow and way too much rocker to get decent low end riding until you get something 6'3 or bigger. It'll go upwind fine as soon as there is plenty of wind but a 6 footer in this shape will not get going any sooner than your average twin tip.

Choose something like this
tokoro_fish_s.jpg
tokoro_fish_s.jpg (7.16 KiB) Viewed 3014 times
And your getting something that planes up early and flies upwind yet is super fun in anything less than powerful surf. A little less sex apeal, but loads of functionality. Go quite a bit shorter in this shape... say 5'6-5'10 ish

Now there certainly are lower rocker pointy little shortboards that work great with a kite and haull ass upwind. I'm just illustrating the general ends of the specturm. Put a race board beside a fish and then a shortboard next to that and it looks like a general progression in shape from total upwind/low wind prowess to ultimate wave riding with the fish in the middle that has visible aspects of both. If I had to put it down to one variable, I would say rocker is probably the biggest factor affecting early planing and upwind competence. Ive seen guys riping upwind on mini guns that have no width to them, but are flat rockered and fast.
Last edited by Starsky on Tue Jan 10, 2012 2:13 pm, edited 1 time in total.

windrupted
Frequent Poster
Posts: 209
Joined: Fri Nov 19, 2010 5:14 am
Local Beach: North Beach, Barney Line, The Wood in Ventucky, Island Park Idaho and Mt Hagin MT
Favorite Beaches: G-Land (Plenkung Point)
Style: Waves, Goofy or Switch
Gear: Craigslist
Brand Affiliation: Charles Shaw
Has thanked: 0
Been thanked: 1 time

Re: Best surfboard shape/fins/thickness for upwind?

Postby windrupted » Tue Jan 10, 2012 2:09 pm

The wider the better, full rails help and flat rocker helps, There is a way to get a board going upwind without tons of fin, by getting well forward and keep the entire board in the water and flat. I was always putting the biggest fins on when I was a rabid surfer, and rode more off the tail. Now that I kite, I rarely use the trailer (center) fin. For strictly getting upwind, it's better just running two. The bigger the board, the more fin area you will need. Generally, the most high performance built short boards go upwind better if you ride them oversized, and full tailed hybrids are especially good. Clunky retro fish shapes may get up on a plane easily, but they turn like dogshit. Couldn't pay me to ride one. Yeah Donavon can ride one, but those guys could ride a door and make it go ok. (Oh god, please dont tell Flysurfer about The Fish....)

JollyGreen
Rare Poster
Posts: 45
Joined: Wed Oct 12, 2011 6:52 am
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: Best surfboard shape/fins/thickness for upwind?

Postby JollyGreen » Tue Jan 10, 2012 2:19 pm

FarQueLot,
I have read the celaritas is a good upwind board, glad to hear, ill keep an eye out to demo that board

tautologies,
Big fins sound like a good idea, should they just be extra tall, or do most surfboards have fins big enough? Should I try and get fins that don't have a lot of sweep to them? Should I try and go for 2, 3 or 4 fins?

Starsky,
Thanks for the info on the fish shape, ill probably try that shape out with some extra thickness, I'm 6'6" 230, you think 5'10" is still big enough?

Windrupted,
ill look into full rails, are those just thicker? The hybrid shape sounds good, you have any pics of what I should look for?

User avatar
Starsky
Very Frequent Poster
Posts: 4373
Joined: Mon Apr 19, 2004 12:12 pm
Brand Affiliation: None
Location: Ontario
Has thanked: 0
Been thanked: 3 times

Re: Best surfboard shape/fins/thickness for upwind?

Postby Starsky » Tue Jan 10, 2012 2:29 pm

In general I agree with windrupted but just to be clear, I'm not suggesting old school fish shapes. Who drives cars or uses phones from the 70's these days??? The modern hibrid or modern fish has very little in common with the old school parallel rails and twinzer designs that first took the name fish. The fish above has thin rails , plenty of outline curve, a single to double bottom shape, quad fin set up. Not much in common with say this:
riff_raff_surfboards_retro_balsa_koa_fish_thumb.jpg
riff_raff_surfboards_retro_balsa_koa_fish_thumb.jpg (18.91 KiB) Viewed 2986 times
I think your right when you say shortboards get decent low end when they are oversized. What I'm talking about allows you to ride the board in a much smaller size, where two boards of equal low end and upwind, say a 6'4 shortboard, and a 5'8 modern fish, the 6'4 will feel like an albatros compared to the skatey slashey little fishey.

All of this is in regard to smaller surf conditions. Once its crankin or were talking bigger swell, the fish will get too bouncy, but the OP was talking about upwind, not surf. Don't think there is one board for all conditions, but firmly feel there are boards that do a great job of covering most of what you see day to day.
Last edited by Starsky on Tue Jan 10, 2012 3:03 pm, edited 1 time in total.

User avatar
Peter_Frank
Very Frequent Poster
Posts: 12746
Joined: Wed Oct 16, 2002 1:00 am
Brand Affiliation: None
Location: Denmark
Has thanked: 1010 times
Been thanked: 1187 times

Re: Best surfboard shape/fins/thickness for upwind?

Postby Peter_Frank » Tue Jan 10, 2012 2:52 pm

Exactly - and as Starsky also just wrote:

The board that cranks upwind, will be horrible for surf - and the other way around :roll:

You can not get both - but you need to take your choices on what compromises you are ready to accept.

I would not use big fins though - they might help marginally on upwind performance, true - but for a waveboard it will fully destroy ANY wave and carvefeel whatsoever :x

And the surfboards are using the "shape" much more than the fins to go upwind, where you glide and ride on the edges of the board, instead of the tail - so width and rockerline and edges are far more important IMO.

Meaning, a good "modern" fish board, with not too big fins - will be able to glide well and go pretty okay upwind - and also ride waves "pretty okay".

Or a not-really-wide but longer board with a long flat rockeroutline, and very sharp edges - will also perform well upwind, and still be quite good in high winds and big waves too, but not perfect in small steep waves.

And one could go on and on !

Basically IMO, a "perfect" waveboard for okay wind and small-medium really steep or fast waves, will be the WORST at going upwind :-?
And the best upwind board will be bad in terms of waveriding :-?


LOTS of different choices - but always a lot of compromises you have to select !

:D Peter

User avatar
Starsky
Very Frequent Poster
Posts: 4373
Joined: Mon Apr 19, 2004 12:12 pm
Brand Affiliation: None
Location: Ontario
Has thanked: 0
Been thanked: 3 times

Re: Best surfboard shape/fins/thickness for upwind?

Postby Starsky » Tue Jan 10, 2012 4:22 pm

JollyGreen wrote:Starsky,
Thanks for the info on the fish shape, ill probably try that shape out with some extra thickness, I'm 6'6" 230, you think 5'10" is still big enough?
I do.

probably a 6'5 + in a shortboard.

All good stuff in this thread.

Construction is another issue. I think its relatively easy to find the right shape. Quite a bit tougher to find it in the right construction, be it beefed up glass job, epoxy, sandwich etc... Tougher still to find it in the right construction that isn't super heavy and stiff.

You can go with a regular surfboard with a decent glass job, but will be limited to riding and lightly at that. Your a big guy, If you wanna rip, tear, slam and jump at all, your gonna crush a regular poly board pretty quick. I hate feeling like I have to baby a board, or kite for that matter.

Both my surfboards are epoxy sandwich, and I searched pretty hard to find ones that aren't stiff bricks. My first surfboard for kiting was poly... Tought me tons, including that I needed something tougher!

User avatar
Xtream
Very Frequent Poster
Posts: 576
Joined: Wed Nov 03, 2004 11:15 pm
Local Beach: Brant Beach LBI
Style: Old School
Gear: Slingshot Machine 12M & 9M
Airush Ultra 17
Nomad Ultrawave
Rogue Wave 132
Rogue Wave Fat Bastard
Brand Affiliation: No Brand Affiliation
Location: LBI NJ
Has thanked: 1 time
Been thanked: 10 times

Re: Best surfboard shape/fins/thickness for upwind?

Postby Xtream » Tue Jan 10, 2012 4:45 pm

JollyGreen Wrote:"I want to ride some small waves and mostly practice carves, toeside, and transitions with some small wave riding. Looking for a general idea of what to look for so I can go hunt around the surfboard shops here and try and find something that might work."

I did some research and just made a decision to pick up the 2012 Slingshot 5-8 Celertias board from Greenhat kiteboarding http://greenhatkiteboarding.com/store/i ... cts_id=882
For your size from what I have read the 5-11 would be your ride.

Have not got a chance to ride it yet but I'm certainly looking forward to it.. Board looks and feels solid and its not to heavy. Planning on riding strapless and strapped.


Xtream
Attachments
P1050065.JPG
P1050063.JPG


Return to “Kitesurfing”

Who is online

Users browsing this forum: Bing [Bot], Brent NKB, evan, Exal, Google [Bot], headintheclouds, hookedcook, joop, KiteWing&Foil, KVL, Ludmil, mati, purdyd, pākihiroa, Rickshawjimmy, SolarSet, tobesen, Wrenit and 194 guests