Contact   Imprint   Advertising   Guidelines

Raceboard bottom shape

Forum for everyone who is into racing and speeding on kites.


BWD
Very Frequent Poster
Posts: 2767
Joined: Thu Jun 05, 2003 3:37 am

Re: Raceboard bottom shape

Postby BWD » Sat May 12, 2012 1:49 am

Keel only on rocker flat maybe, not the front part of board.
rails rounded to " a bit" behind front fins.
Keel may help with chop, but it will very likely limit top speed.
Analogous to variable deadrise in powerboat design I think.
If limited, the "keel" will produce a chop benefit with a limit in top speed that falls outside the board's normal performance envelope (ie >/= 30knots).
Tricky part, these boards are nipping at that limit already, and in powerboats the variable deadrise strategy kicks in at the same level as a maximum with plenty of power. In fact as a rule of thumb for powerboats, variable deadrise is most suited for boats that top out under 25kts.
Just cogitating a bit,,,,
Starboard some years ago made a (slalom oriented??) windsurfer that had something like a keel. Don't think it caught on.
Worth trying though....

User avatar
ChristoffM
Medium Poster
Posts: 196
Joined: Tue Jul 19, 2011 5:26 pm
Kiting since: 2005
Local Beach: Langebaan and Cape Town.
Favorite Beaches: Anywhere in the Cape, South Africa.
Style: Hydrofoils! (And surf and old school)
Gear: Cape Town Foilboard and Spotz hydrofoils.
Any kite that can keep up with the hydrofoils.
Brand Affiliation: Cape Town Foilboards
Location: Langebaan (Cape Town)
Contact:

Re: Raceboard bottom shape

Postby ChristoffM » Sat May 12, 2012 12:15 pm

I don't think that would solve the problem I had? Having the back part of the board flat or with double concave or keel should not effect how high the nose is when it hits oncoming chop. It looks too counterintuitive and will require a lot of sanding effort to try. I think I'll stick with flat for my current board.

longwhitecloud
Very Frequent Poster
Posts: 1880
Joined: Fri Sep 11, 2009 3:15 am
Kiting since: 0
Style: Fast, anti lawnmower.
Gear: Wipika Freeair 8.5 2 liner and Picklefork.
Brand Affiliation: iansmusic.com - free music for your kite videos

Re: Raceboard bottom shape

Postby longwhitecloud » Sat May 12, 2012 1:35 pm

What are people using? some kind of double concave for a bit more control/stability when board 1/2 out of water?


Return to “Kiteracer”

Who is online

Users browsing this forum: No registered users and 3 guests