Here you can exchange your experience and datas about your home build boards
-
swim82
- Rare Poster
- Posts: 44
- Joined: Mon Apr 23, 2007 1:15 pm
-
Has thanked:
0
-
Been thanked:
0
Postby swim82 » Sun Jun 03, 2012 3:46 am
I just started a new board with strips of western red cedar. I am used to making boards out of foam but this is my first one made out of wood. I was wondering if any of you guys know how much more rocker is needed on the rocker table vs the rocker you want on the board. I,m guessing that the woods elasticity will make the board with less rocker then the table.
is it twice as much? I also understand that the thinner the board is the less ''comeback'' the board will have. thanks for any input.
-
Hollow
- Rare Poster
- Posts: 26
- Joined: Tue Feb 07, 2012 8:56 pm
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Hollow » Mon Jun 04, 2012 10:19 am
Depends on how much fibers are you going to put and concave also.
It will be -40% to -20% total but increasing towards the tips.
Concave increases slightly when rocker decreases.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 156 guests