Contact   Imprint   Advertising   Guidelines

Race board

here you can exchange your experience and datas about your home build boards

User avatar
Rare Poster
Posts: 11
Joined: Mon Jan 25, 2010 5:55 am
Kiting since: 0
Brand Affiliation: None

Race board

Postby mthboards » Wed Aug 29, 2012 12:53 am

Anyone build a race board?
I want to try and make one and I know its not going to come out exactly how I want, but I want
it to kind of work.

Very Frequent Poster
Posts: 546
Joined: Mon Oct 08, 2007 4:39 am

Re: Race board

Postby gbleck » Thu Aug 30, 2012 4:58 pm

Link to build videos.
Pop me your email and I can forward you a copy of the board cad file. I should find a place to host it publicly. Any ideas? Don't think the forum has a file host function does it?

Won't be IKA production compliant but you don't have to wait on a list. :)

If you want to make it lighter scale it down 1/4 inch and bag on some 1/8 closed cell foam. Next board I do will be sandwich. Oh and don't fall for the temptation of sanding the rails with the rotary disk sander. You will inevitably burn through the rail at the transition between round and hard edge just in front of the fins. I just cut that section out and fixed it.

All props to Gary Menk. His sight has good written instructions on a similar build.

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 2 guests