*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 30 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Mon Sep 17, 2012 2:24 am 
Offline
Very Frequent Poster
User avatar

Joined: Wed Dec 20, 2006 2:39 am
Posts: 535
Location: Kite Shop
No, it's not just a longer line.


Top
Profile
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Mon Sep 17, 2012 4:39 am 
Offline
Medium Poster

Joined: Mon Jul 30, 2012 12:11 am
Posts: 52
droffats wrote:
No, it's not just a longer line.

Mhh alright what more changed tell me so i see if its worth to update my 2012 bar Ozone Edge bar.


Top
Profile
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Thu Sep 20, 2012 2:16 am 
Offline
Very Frequent Poster
User avatar

Joined: Wed Aug 24, 2011 11:39 am
Posts: 1095
The race bar is a 4:1 depower, where the standard bar is 2:1 The racebar looks to have a much longer depower than the 5 inch on the standard bar. I ordered the race bar but they sent me a standard bar for now, while the racebar is back ordered.


Top
Profile
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Thu Sep 20, 2012 7:08 am 
Offline
Very Frequent Poster

Joined: Tue Oct 14, 2008 9:14 am
Posts: 621
Location: outer space
Hawaiis wrote:
The race bar is a 4:1 depower, where the standard bar is 2:1 The racebar looks to have a much longer depower than the 5 inch on the standard bar. I ordered the race bar but they sent me a standard bar for now, while the racebar is back ordered.

Hi hawaiis, when you get your racebar in, could we get some detailed pics and measurements from you? That would be a great help! :thumb:
Thx dude :cool2:


Top
Profile
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Thu Sep 20, 2012 2:55 pm 
Offline
Very Frequent Poster

Joined: Mon Oct 08, 2007 4:39 am
Posts: 544
It looks longer but the actual depower is 1/2 the total length to the top of the cascade.


Top
Profile
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Fri Sep 21, 2012 2:47 am 
Offline
Very Frequent Poster
User avatar

Joined: Wed Aug 24, 2011 11:39 am
Posts: 1095
naishdude wrote:
[
Hi hawaiis, when you get your racebar in, could we get some detailed pics and measurements from you? That would be a great help! :thumb:
Thx dude :cool2:


Sure, I will definitely do that,

There is a red plastic ball midway on one of the 25M front line, I wonder what it is for? there is no manual or instructions on the standard bar.


Top
Profile
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Fri Sep 21, 2012 8:14 am 
Offline
Very Frequent Poster

Joined: Tue Oct 14, 2008 9:14 am
Posts: 621
Location: outer space
Hawaiis wrote:
naishdude wrote:
[
Hi hawaiis, when you get your racebar in, could we get some detailed pics and measurements from you? That would be a great help! :thumb:
Thx dude :cool2:


Sure, I will definitely do that,

There is a red plastic ball midway on one of the 25M front line, I wonder what it is for? there is no manual or instructions on the standard bar.

Wen you pull your QR it prevents tne bar to slide all the way up, now ypu can still reach it to assemble the whole thing:-) :thumb:
Cheers,
Dude :cool2:


Top
Profile
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Tue Oct 16, 2012 5:45 am 
Offline
Very Frequent Poster
User avatar

Joined: Wed Aug 24, 2011 11:39 am
Posts: 1095
The race bar finally came today, it has a total depower travel of 7 inches, only a couple inches longer than the standard bar.
it did not have the red ball in the middle of one of the front lines.
The ends of the rear flying lines are all all loops. I have to attach pig tails so they can attach to the kite.
today's wind was from 3-17MPH, it came in really handy and very smooth. I only have trouble when I pull the depower all the way in and it get stuck. Very hard to release. So I will remember to leave a small section of rope for easier release.


Top
Profile
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Tue Oct 16, 2012 5:44 pm 
Offline
Very Frequent Poster

Joined: Tue Oct 14, 2008 9:14 am
Posts: 621
Location: outer space
Hawaiis wrote:
The race bar finally came today, it has a total depower travel of 7 inches, only a couple inches longer than the standard bar.
it did not have the red ball in the middle of one of the front lines.
The ends of the rear flying lines are all all loops. I have to attach pig tails so they can attach to the kite.
today's wind was from 3-17MPH, it came in really handy and very smooth. I only have trouble when I pull the depower all the way in and it get stuck. Very hard to release. So I will remember to leave a small section of rope for easier release.

Sounds good,
I attached a line through the loop of the depower pull, and it hangs over my bar, added a few knots and works perfect, but it is a bit heavy to pull.
So if you could lay out your bar and depowersystem flat on the floor, And make some sharp pictures of it, maybe add some distance measurements etc, then I could try to change mine by adding a pulley etc..
Thx
Dude :cool2:


Top
Profile
 Post subject: Re: ozone edge 2013 racebar setup?
PostPosted: Tue Oct 16, 2012 7:35 pm 
Offline
Very Frequent Poster
User avatar

Joined: Wed Aug 24, 2011 11:39 am
Posts: 1095
The marble floor is 1 foot square


Attachments:
image.jpg
image.jpg [ 1.6 MIB | Viewed 986 times ]
Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 30 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group