Contact   Imprint   Advertising   Guidelines

Dynabar: best way to bend it back to original curve?

Forum for kitesurfers
User avatar
lieutenantglorp
Medium Poster
Posts: 169
Joined: Sat Mar 01, 2008 7:19 am
Gear: Any
Brand Affiliation: None
Location: San Mateo, CA USA
Has thanked: 0
Been thanked: 0

Dynabar: best way to bend it back to original curve?

Postby lieutenantglorp » Wed Dec 19, 2012 7:56 pm

I bought a second one to keep on hand so I can just swap the whole bar when I want to change styles. I noticed the one I have been using the most has developed more curvature than the new one that is flatter. They are the same model 13" v6 or v7. It must get bent over time from extreme kite pull. Prob does not happen if you use the rope, but i prefer the wave bar and freeride bar. Can anyone recommend an easy method to bend both the frame and bar back? The flatter one is definitely more comfortable.

User avatar
jaystore
Frequent Poster
Posts: 328
Joined: Thu Jan 28, 2010 9:27 am
Local Beach: Rome
Brand Affiliation: JAY
Location: Rome
Has thanked: 0
Been thanked: 3 times
Contact:

Re: Dynabar: best way to bend it back to original curve?

Postby jaystore » Thu Dec 20, 2012 4:38 pm

Hi, could you send us photos at support@jaystore.eu so we can evaluate the model and problem you have. V7 is stronger than V6.
DYNABAR is not designed for hard usage like snowkiting and climbing hills (a lot of pull at low speed). More dynamic you are and less pull your transmit to DYNABAR.
In the initial design one requirement was the low weight, but we had to sacrifice strongness.
The next models will come with a reinforced frame, we will sacrifice weight (about +100gr) for more resistance.
Carbon fiber could be the compromise, we are already evaluating this option.

Thanks for your understanding.

Outside
Rare Poster
Posts: 34
Joined: Thu Jul 21, 2011 8:11 pm
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: Dynabar: best way to bend it back to original curve?

Postby Outside » Thu Dec 20, 2012 8:22 pm

Mine is definitely bent in the same manner. It is a v7 11 inch, only used with the rope and only used strapless on water.

I set it on a hard surface and pushed down to bend it back, but it re-bent the next time I used it.

User avatar
lieutenantglorp
Medium Poster
Posts: 169
Joined: Sat Mar 01, 2008 7:19 am
Gear: Any
Brand Affiliation: None
Location: San Mateo, CA USA
Has thanked: 0
Been thanked: 0

Re: Dynabar: best way to bend it back to original curve?

Postby lieutenantglorp » Wed Jan 09, 2013 5:52 pm

Old one bent and new one not bent (yet)
Attachments
2013-01-08_19-26-47_445.jpg
2013-01-08_19-26-19_260.jpg

Telekiter
Frequent Poster
Posts: 265
Joined: Thu Nov 10, 2005 10:37 pm
Gear: Kites:
-7.5 m, BEST kahoona -09
-9 m Switch Element -12
-13 m Switch Element -12
-17 m Blade Fat Lady -11
-10 m, FS Psycho3, -08


Boards:
-OR Mako 150x40.
-OR Mako King 165x44
Brand Affiliation: Switchkites Team rider.
Location: Sweden
Has thanked: 0
Been thanked: 0

Re: Dynabar: best way to bend it back to original curve?

Postby Telekiter » Thu Jan 10, 2013 8:55 am

jaystore wrote:Hi, could you send us photos at support@jaystore.eu so we can evaluate the model and problem you have. V7 is stronger than V6.
DYNABAR is not designed for hard usage like snowkiting and climbing hills (a lot of pull at low speed). More dynamic you are and less pull your transmit to DYNABAR.
In the initial design one requirement was the low weight, but we had to sacrifice strongness.
The next models will come with a reinforced frame, we will sacrifice weight (about +100gr) for more resistance.
Carbon fiber could be the compromise, we are already evaluating this option.

Thanks for your understanding.

Hmmm....you are marketing the Dynabar as the perfect spreader bar for snowkiting, and now you say that it is not designed for snowkiting?

I find it very hard to believe that snowkiting creates more forces on the spreader bar than kitesurfing.

/Urban.

sfpete
Medium Poster
Posts: 156
Joined: Tue Sep 07, 2010 10:47 pm
Local Beach: San Francisco Bay area
Style: stayin' alive
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: Dynabar: best way to bend it back to original curve?

Postby sfpete » Thu Jan 10, 2013 5:55 pm

Where is it bent? Those look like two different bars.

User avatar
lieutenantglorp
Medium Poster
Posts: 169
Joined: Sat Mar 01, 2008 7:19 am
Gear: Any
Brand Affiliation: None
Location: San Mateo, CA USA
Has thanked: 0
Been thanked: 0

Re: Dynabar: best way to bend it back to original curve?

Postby lieutenantglorp » Thu Jan 10, 2013 6:03 pm

sfpete wrote:Where is it bent? Those look like two different bars.
Same bar, different style slider. The old one looked like the new one originally.

User avatar
jaystore
Frequent Poster
Posts: 328
Joined: Thu Jan 28, 2010 9:27 am
Local Beach: Rome
Brand Affiliation: JAY
Location: Rome
Has thanked: 0
Been thanked: 3 times
Contact:

Re: Dynabar: best way to bend it back to original curve?

Postby jaystore » Thu Jan 10, 2013 7:00 pm

Sfpete has more attention to details than me! Maybe I'm wrong but the two bars are dfferent sizes, it's normal that the 11" is more curved then the 13" due to body shape.

@telekiter
I made a mistake, hard snowkiting is climbing mountain and the pull is really hard.
The DYNABAR XT 2013 has a reinforced frame and will be usable also to climb mountains!

We sponsor the world snowkiting race champion but he is riding mostly on flat.
Image

L0KI
Very Frequent Poster
Posts: 2817
Joined: Thu Aug 18, 2005 1:17 am
Gear: .
Has thanked: 0
Been thanked: 1 time

Re: Dynabar: best way to bend it back to original curve?

Postby L0KI » Thu Jan 10, 2013 7:16 pm

I have the freestyle model, which has a U Bolt at the center, so the pull force is all at the center.
Bent the shit out of mine, in six months.
I got a 3/16" plate of stainless sheet stock and and cut it to fit in behind the original piece and bent it into the curve needed, and then welded it in place.
It is double thick now and comes out further toward the ends as well, so it does not bend anymore..at all.
Attachments
dyna6.jpg
dyna5.jpg
dyna3.jpg
dyna2.jpg
dyna1.jpg

User avatar
lieutenantglorp
Medium Poster
Posts: 169
Joined: Sat Mar 01, 2008 7:19 am
Gear: Any
Brand Affiliation: None
Location: San Mateo, CA USA
Has thanked: 0
Been thanked: 0

Re: Dynabar: best way to bend it back to original curve?

Postby lieutenantglorp » Thu Jan 10, 2013 8:22 pm

jaystore wrote:Maybe I'm wrong but the two bars are dfferent sizes, it's normal that the 11" is more curved then the 13" due to body shape.
Nope. Both the same bar, possibly different version but same length. Never snow kited with them yet :(


Return to “Kitesurfing”

Who is online

Users browsing this forum: alford, Bing [Bot], Brent NKB, decay, droffats, jjm, pj sofine, Sun and 125 guests