Could anybody with a 2013 Airush Smart Bar, which allows flagging to a front line, or anybody with an Airush 'Brain' chicken loop please tell me;
1. what is the diameter of the hole going through the 'Brain' chicken loop
2. is the front line just linked to the safety line by a simple loop to loop join
3. how are the Airush line end loops finished? Do they have a 'step' in like mine where the line is spliced back on itself? This makes them pass through a tight hole OK (loop first) but are then harder to return through the same hole due to the step
I was hoping to attach pictures but this forum does not let me easily do so.
I ask this as I have been trying to make a bar where the front lines can be untwisted but, crucially, the leash attachment stays put in the centre of the chicken loop.
I tried to use my fairly recent(2010) North Iron Heart bar in this way but the hole in the centre is too small to enable a loop joined front line to safety line to pass through. This is 5mm diameter on the North bar and I am hoping that the Airush chicken loop has a bigger hole.
If the Airush bar does have a bigger hole I might buy an Airush chicken loop and modifying a bar. I would consider buying a whole bar but at £320 here in the UK it's a bit expensive!
I hope this makes sense, if not I will have to find a way I can upload pictures
Thanks