Here you can exchange your experience and datas about your home build boards
-
Danydan
- Medium Poster
- Posts: 96
- Joined: Thu Mar 15, 2012 7:32 pm
- Style: Freeride/Freestyle
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Danydan » Sun Jan 06, 2013 10:44 pm
Hello everybody,
just received all I needed to start making boards and I am in search of the measurement of a big board for light wind, like a Spleene Door or Monster Door (not decided yet). I do know that it is not a complex design but I'm wondering what is the difference between the width of the board at the center and at the extremeties (nose & tail), what does the rocker looks like (I suspect it is fairly flat but would like a confirmation) and finally what is the thickness of board at the center & nose/tail???
Thanks for your help and have a good winter.
Dany
-
jyetley
- Rare Poster
- Posts: 49
- Joined: Fri Nov 04, 2011 3:49 pm
- Local Beach: Millacs MN, Pepin WI, Clear Lake IA
- Favorite Beaches: Spring: Texas's Laguna Madre or Florida's Pan Handle.
Summer: Michigan's Western Shore
Fall: Upper Mississippi River
Winter: Utah's Wasatch or Wyoming's Teton Mountains.
- Style: Freeride
- Gear: Ozone, Slingshot, Best
- Brand Affiliation: None
- Location: Minnesota
-
Has thanked:
0
-
Been thanked:
0
Postby jyetley » Mon Jan 07, 2013 3:24 am
I have a spleene door right in front of me. 2011 High Tech model... Same as 2012. I'm a 170 pounds. And I love this board....but it was expensive.
My buddy is probably 220 and he loves his 2011 high tech Monster door also.
My board measurements are:
width in the middle.....16 9/16 inch
Board plack reads 159x45cm
width at the ends....17 1/2 @ 7 1/2 from each end.
Thickness at the each ends....1/8
Thickness in the middle, at each side....9/32
Thickness in the middle, at the center is...7/16
Last edited by
jyetley on Mon Jan 07, 2013 4:48 pm, edited 1 time in total.
-
jyetley
- Rare Poster
- Posts: 49
- Joined: Fri Nov 04, 2011 3:49 pm
- Local Beach: Millacs MN, Pepin WI, Clear Lake IA
- Favorite Beaches: Spring: Texas's Laguna Madre or Florida's Pan Handle.
Summer: Michigan's Western Shore
Fall: Upper Mississippi River
Winter: Utah's Wasatch or Wyoming's Teton Mountains.
- Style: Freeride
- Gear: Ozone, Slingshot, Best
- Brand Affiliation: None
- Location: Minnesota
-
Has thanked:
0
-
Been thanked:
0
Postby jyetley » Mon Jan 07, 2013 3:32 am
I love my board too. I would determine which board fits you best and build the board accordingly. I'd guess that the Monster has the same measurements as the standard door, just scaled up.
-
Attachments
-
-
Danydan
- Medium Poster
- Posts: 96
- Joined: Thu Mar 15, 2012 7:32 pm
- Style: Freeride/Freestyle
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Danydan » Mon Jan 07, 2013 9:30 pm
Thanks jyetley, exactly the kind of info I needed... Given the fact that I'm 175lbs but currently about 185 because of the Christmas festivities, I will start with a Spleene Door as opposed to a Monster...
-
jyetley
- Rare Poster
- Posts: 49
- Joined: Fri Nov 04, 2011 3:49 pm
- Local Beach: Millacs MN, Pepin WI, Clear Lake IA
- Favorite Beaches: Spring: Texas's Laguna Madre or Florida's Pan Handle.
Summer: Michigan's Western Shore
Fall: Upper Mississippi River
Winter: Utah's Wasatch or Wyoming's Teton Mountains.
- Style: Freeride
- Gear: Ozone, Slingshot, Best
- Brand Affiliation: None
- Location: Minnesota
-
Has thanked:
0
-
Been thanked:
0
Postby jyetley » Mon Jan 07, 2013 10:10 pm
Not much trouble....pm me if you have any more questions about the measurements.
fyi, I pay $700 for that board new, but on closeout as it was April 2012. I think you'll have good results in comparison.
-
Raslikk
- Rare Poster
- Posts: 15
- Joined: Thu Sep 05, 2013 9:16 pm
- Gear: Flysurfer
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Raslikk » Fri Sep 06, 2013 10:36 am
Hey, how much are picking up the end boards? Please cm in the English degree gives me a hard time then
Thanks for the answer, martas
-
Kamikuza
- Very Frequent Poster
- Posts: 7057
- Joined: Fri Jan 09, 2009 4:49 am
- Local Beach: Sabae Beach
- Favorite Beaches: Ol' Stinky
- Gear: This, that, the other
-
Has thanked:
220 times
-
Been thanked:
193 times
Postby Kamikuza » Fri Sep 06, 2013 10:55 am
jyetley wrote:I love my board too. I would determine which board fits you best and build the board accordingly. I'd guess that the Monster has the same measurements as the standard door, just scaled up.
Note in this pic how the pads aren't centered - they're closer to the heel side edge. I believe this is vital for improving the range of the board, by allowing you to have a wide board but still be able to hold down power.
Also, unless you are yourself a heavy-weight, go for a short, super-wide board like 140x48.
IMO, FWIW etc etc.
-
not annonymous
- Very Frequent Poster
- Posts: 587
- Joined: Thu Feb 20, 2003 7:14 pm
-
Has thanked:
0
-
Been thanked:
0
Postby not annonymous » Mon Sep 09, 2013 1:50 am
Hi, I'm 84 kg. I like 150x46 cm with 2,5 cm or even 2cm rocker. Relatively square outline but still a natural curve around 2.5 cm in from the center towards the tips.
Ideally, the flatter the rocker, the more you want the board to flex. You want it to take off fast but then flex so that it slows down when you load it up hard- tricky because it depends on your weight and riding style.
You can go wider if you are heavy or just want a super light wind cruising-only board.
Offsetting the foot straps only makes the board behave like a narrower board on heelside and totally screws up toeside.
Trent Hink
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Wed Sep 11, 2013 6:27 am
not annonymous wrote:
Offsetting the foot straps only makes the board behave like a narrower board on heelside and totally screws up toeside.
Trent Hink
I very rarely ride on toeside in a light wind...
-
not annonymous
- Very Frequent Poster
- Posts: 587
- Joined: Thu Feb 20, 2003 7:14 pm
-
Has thanked:
0
-
Been thanked:
0
Postby not annonymous » Thu Sep 12, 2013 12:59 am
[ quote="downunder"]
not annonymous wrote:
Offsetting the foot straps only makes the board behave like a narrower board on heelside and totally screws up toeside.
Trent Hink
I very rarely ride on toeside in a light wind...
[/quote]
Read the first part. Read it again and think about it juts a little bit...
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 157 guests