Forum for kitesurfers
-
w_ndrunner
- Rare Poster
- Posts: 19
- Joined: Thu Dec 13, 2012 2:54 pm
- Local Beach: Lake Superior
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby w_ndrunner » Fri Feb 22, 2013 5:16 am
hi all,
All things being equal (kite brand, amount of flying time, same owner, etc) will a kite last longer in cool dry climate or wet hot (tropical) climate?
This question came to mind after talking to a few kiter who claim that the glue used by kite manufactures doesn't stand up well in a country say like Thailand. One kiter says he uses a "special glue" when making repairs.
This does not seem logical since most kites are made in South East Asia and most (assumption) kites are flown in air that is warm and humid.
So, what is your experience? Do kite valves, for example need to be reset more often when you travel south to a warmer, humid climate?
Thanks in advance for your input.
w_ndr
-
sarc
- Very Frequent Poster
- Posts: 1629
- Joined: Sun Jun 11, 2006 4:01 am
-
Has thanked:
37 times
-
Been thanked:
135 times
Postby sarc » Fri Feb 22, 2013 8:31 am
Yes and Yes.
Storing the kite wet/humid and in warm conditions will shorten life of bladders/valves. Some brands are much worse than others.
The 'special glue' you mention is Aquaseal, 3M 5200 also works.
Dry your kites before you put them away and keep a tube of Aquasel handy. Cheers
-
eree
- Very Frequent Poster
- Posts: 1261
- Joined: Sun Jul 13, 2008 9:49 am
- Brand Affiliation: None
- Location: shallow sea
-
Has thanked:
9 times
-
Been thanked:
1 time
Postby eree » Fri Feb 22, 2013 6:34 pm
besides bladder valves in higher temperatures issues there is UV radiation, which is higher in the tropics where sun is higher. UV ruins polyester, the stuff kite cloth and lines are made from.
more UV more polyester deterioration
-
DJwilson
- Medium Poster
- Posts: 84
- Joined: Sun Jan 31, 2010 11:34 pm
- Local Beach: South coast UK
- Favorite Beaches: Nappeague, USA
Paros, GREECE
Wissand, FRANCE
Alvor, PORTUGAL
- Style: Freeride, waves
- Gear: Ozone, Wainman, various boards
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby DJwilson » Fri Feb 22, 2013 9:18 pm
My mate always reckoned that salt water actually preserved the kite rather than degraded it. I always liked that theory
-
jbdc
- Medium Poster
- Posts: 126
- Joined: Fri Sep 28, 2012 11:51 pm
- Local Beach: Ashbridges Bay, ON
Cherry Beach, ON
Hanlan's Point, ON
- Favorite Beaches: Hanlan's Point, ON
Cherry Beach, ON
Ashbridges Bay, ON
Delray Beach, FL
- Style: Intermediate
- Gear: 2012 Pansh Aurora 15m
2010 Slingshot Octane 13m
2011 Cabrinha Crossbow 9m
2012 Ocean Rodeo Rise 7m
2012 Ocean Rodeo Cypher 5m
2010(?) Imagine Surf Fat Fish 5'2"
2011 Nobile NBL 142x42cm
2012 Ocean Rodeo Mako FR 135x37cm
2004 Gaastra Force 14m
2002 Liquid Force Switch 185cm
- Brand Affiliation: None
- Location: Toronto, ON
-
Has thanked:
0
-
Been thanked:
0
Postby jbdc » Fri Feb 22, 2013 9:27 pm
DJwilson wrote:My mate always reckoned that salt water actually preserved the kite rather than degraded it. I always liked that theory
Nice theory, I'm guessing the notion is that you're less likely to get mildew from salt water or something?
My theory is that salt crystals left behind after the sea water evaporates will wear the kite faster by abrading the fibres in the weave.
-
eree
- Very Frequent Poster
- Posts: 1261
- Joined: Sun Jul 13, 2008 9:49 am
- Brand Affiliation: None
- Location: shallow sea
-
Has thanked:
9 times
-
Been thanked:
1 time
Postby eree » Sat Feb 23, 2013 1:03 am
well when it is cold and wet it is probably not in the tropics, but not in the subzero temperatures.
so less UV anyway and no bladder glue melting. best conditions to the kite!
welcome to my world!
-
w_ndrunner
- Rare Poster
- Posts: 19
- Joined: Thu Dec 13, 2012 2:54 pm
- Local Beach: Lake Superior
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby w_ndrunner » Sat Feb 23, 2013 5:51 am
sarc wrote:Yes and Yes.
Storing the kite wet/humid and in warm conditions will shorten life of bladders/valves. Some brands are much worse than others.
The 'special glue' you mention is Aquaseal, 3M 5200 also works.
Dry your kites before you put them away and keep a tube of Aquasel handy. Cheers
O.K. so kite is dry before putting them away, is it still your opinion that warm conditions (tropics) will shorten life of bladders/valves on some brands.
And will Aquaseal stand up as well in either warm or cold climates or will heat and humidity break the product down faster than normal?
Again, thanks for your opinion.
cheers,
w_nd
Last edited by
w_ndrunner on Sat Feb 23, 2013 3:09 pm, edited 1 time in total.
-
redman333
- Medium Poster
- Posts: 109
- Joined: Wed Jan 19, 2011 7:42 pm
- Local Beach: Wilmington, NC USA
- Style: unknown yet
- Gear: Looking to pick some up
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby redman333 » Sat Feb 23, 2013 3:03 pm
Now this is just my theory as i used to live in a very very cold climate. I think that the only time youd have any issues is when you go to fold up the kite in a cold climate. I know when we used to fold tarps up we would use the same ones for winter since we would use one tarp for the snowmobiles and others for 4 wheelers. The 4 wheeler tarps rarely wore out but the snowmobile ones would since when they are cold they dont like to bend much and they fray at fold points very easily. I would think a kite could be the same way.
-
SENDIT!
- Very Frequent Poster
- Posts: 926
- Joined: Sun Sep 22, 2002 1:00 am
- Kiting since: 2000
- Local Beach: Okaloosa Island
- Favorite Beaches: In no particular order; Kailua Beach, Oahu; Lake Nitinaht, BC; OBX
- Gear: Ocean Rodeo Flite 17 Aluula, North Reach 12, Ocean Rodeo Rise 10, Reach 9, Prodigy 7, Litewave Carbon Wing 165, Ocean Rodeo Mako 150, Poptart 139, Litewave Carbon Kick S 139, North Scoop/Sonar Surf Foil
- Brand Affiliation: Mojo Actionsports
- Location: Mojo Actionsports.com
-
Has thanked:
537 times
-
Been thanked:
65 times
Postby SENDIT! » Sat Feb 23, 2013 7:08 pm
Well, I lived in Hawaii for a few years and had no issues with my bladders/valves/kites, etc...and I kited ALOT!
Where I HAVE seen problems, is storing kites in the garage in the summer. I lost EVERY single valve on both of my kites in one summer b/c of that. I didn't realize that was what was doing it until sometime later. Case in point, when we do a repair to replace faulty valves, we soak the valve seal in hot water and it peels right off.
Return to “Kitesurfing”