*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 20 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: borads with big rocker
PostPosted: Mon Jan 28, 2013 2:45 pm 
Offline
Rare Poster

Joined: Wed Nov 14, 2012 12:20 pm
Posts: 7
Cab Custom is just amazing,
but you are gonna need some more speed to plane and gonne loose some upwind ability due to the flatter centre of the board, there s more concave in NHP.
Love the Custom though! Is quite unique.
North Gambler, Joke and Naish Momentum other choices..

Happy Kite Dahab


Top
Profile
 Post subject: Re: borads with big rocker
PostPosted: Mon Mar 25, 2013 1:20 am 
Offline
Medium Poster

Joined: Tue Jul 24, 2012 2:52 am
Posts: 120
Did a bunch of measuring on all my boards, someone had asked about rocker sizes.

Here are some rough measurements.

Airush Livewire 2013 142 : 47 - 52 mm depending on where on the bat tail you measure.

Airush FS Park 2011 or 2012, not sure, 54 mm

Flexifoil Hadlow Freestyle Mk1 53 mm

Flexifoil Hadlow Wakestyle Mk1 55 mm

http://imgur.com/a/xMByL


Top
Profile
 Post subject: Re: borads with big rocker
PostPosted: Mon Mar 25, 2013 1:34 am 
Offline
Rare Poster

Joined: Sun Nov 16, 2008 2:04 pm
Posts: 2
Thank you so much again :thumb:


Top
Profile
 Post subject: Re: borads with big rocker
PostPosted: Mon Mar 25, 2013 1:45 am 
Offline
Medium Poster

Joined: Tue Jul 24, 2012 2:52 am
Posts: 120
No worries. Throw me a pm with your finished product when you get there. Right now I have a ghetto plywood board going together, my base material will be a double layer of fibreglass and west epoxy. I KNOW the base material will last longer than the core so I wouldn't go apeshit trying to find the ULTIMATE base material your first few boards, as even a fibreglass + poly over foam core board will slide and last a decent amount of time.


Top
Profile
 Post subject: Re: borads with big rocker
PostPosted: Mon Mar 25, 2013 9:15 am 
Offline
Medium Poster

Joined: Sat Sep 11, 2010 9:12 am
Posts: 117
Did you rip out inserts from your Hadlow board?


Top
Profile
 Post subject: Re: borads with big rocker
PostPosted: Mon Mar 25, 2013 4:32 pm 
Offline
Medium Poster

Joined: Mon Jun 07, 2004 8:44 am
Posts: 123
DirkGently wrote:
Airush Livewire (1st choice)
Flexifoil Hadlow Freestyle (funnest board I've ever owned)
Airush FS & FS Park (If you can find it)
Tona Pop

if you're not riding boots, Airush FS Team

Don't get a Cabrinha Custom older than 2012...they look much better in terms of construction in the later models, I had a 2010, was seriously unimpressed a week after purchase.

http://www.kitepaddlesurf.com/2011-Liquid-Force-Kiteboarding-Kaos-Kiteboard-299-133cm-Only-2118070.htm

^ Pretty sweet deal on an awesome board.


Just for the record, the Kaos is a very FLAT board = low rocker


Top
Profile
 Post subject: Re: borads with big rocker
PostPosted: Mon Mar 25, 2013 4:54 pm 
Offline
Medium Poster

Joined: Tue Jul 24, 2012 2:52 am
Posts: 120
wrogu wrote:
Did you rip out inserts from your Hadlow board?


yup

kas911 wrote:

Just for the record, the Kaos is a very FLAT board = low rocker


I'd agree on the surface but I took it for a spin the year it came out and I thought it flexed like a mutha when you loaded it up and it could achieve a profile in the water that provided a launch comparable to other high rocker boards I'd owned at the time (Custom, some LF foam job that didn't really go anywhere)


Top
Profile
 Post subject: Re: borads with big rocker
PostPosted: Mon Mar 25, 2013 6:14 pm 
Offline
Very Frequent Poster
User avatar

Joined: Sun Sep 04, 2011 5:37 pm
Posts: 1755
DirkGently wrote:
wrogu wrote:
Did you rip out inserts from your Hadlow board?


yup
...


Post a picture of the damage over on Board-Builders ; cause
that's a fairly easy Fix there Dudster ...

You can get a bit more complicated, by replacing a section of the core
in that spot, and make it so it Never breaks there again !!

If Ya live near Vegas, i'll show you how to fix it yourself, and supply
the materials, for a 12pk of Guinness stout & a bottle of JD !! :D

Bille


Top
Profile
 Post subject: Re: borads with big rocker
PostPosted: Mon Mar 25, 2013 9:00 pm 
Offline
Medium Poster

Joined: Tue Jul 24, 2012 2:52 am
Posts: 120
The core is entirely split down the middle, tip to tail, only the bottomsheet and topsheet are holding it together right now, so the plan is to hold onto the board until I have access to a proper workshop, remove the center 6" of core, tip to tail, remove the entire topsheet, and then relaminate it all together.

I'm in Canada or else I might take you up on your offer...my girlfriend is less than receptive to me doing the work in the living room.


Top
Profile
 Post subject: Re: borads with big rocker
PostPosted: Mon Mar 25, 2013 11:07 pm 
Offline
Medium Poster

Joined: Sat Sep 11, 2010 9:12 am
Posts: 117
Was it MK1 or MK2 board? And did you use bindings? Prolly yes i suppose.....


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 20 posts ]  Go to page Previous  1, 2

All times are UTC + 1 hour


Who is online

Users browsing this forum: Fatfish98, kite-kid, Peter_Frank and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group