I Understand you Peter ; sorry i came on so strong !Peter_Frank wrote: ...
And as we are some who simply hates a bar that is not fixed (a sliding or tilting spreader bar), this is not an option, eventhough the stress might be less.
Unfortunately I dont think there is much to do about this risk
Peter
The hook does go through the bar and is welded on both sidesKamikuza wrote:I'm pretty sure the hook goes through the spreader bar and is welded on both sides. They've both broken on the front side, at the base of the hook just above the weld
I'd like to try a Dynabar, but I'm a bit dubious that they'll survive any better - nuts, threads, moving parts... hmm.
Does the V7 fit the Dakine hooks?
Thank you for posting this. I just checked my Dakine spreader bar and there is a hair line crack on the left side starting to work its way across the weld line. Getting this replaced tomorrow.John-B wrote:Having a powered 11m session last night when my spreader bar snapped and fully detached. Luckily I was doing a carve transition and I was ripped from my footstraps before the bar was ripped from me and because I attach my leash to part of it my kite took a few tumbles dragging the lines with it before settling LE down. Lucky as; the tide was going out and there was room upwind; escaped with only some staved fingers and a badly bruised hand; and lucky because I was doing some pretty big jumps in what was, due to the tide, pretty shallow water.
The spreader bar is less than a year old, there is no sign of rust, or wear.There was no warning, it happened so fast I had no time to react and it was pretty violent. I emailed the manufacturer who has offered a warranty replacement no quibbles; however a quick google shows that this is more common that you might think on these bars. Also irrespective of this how many failures like this is too many? This is a critical piece of equipment and it made me think what if this had happened at a busy launch such as where I go on holiday like El Medano, or if another water user had been nearby?
This is something that probably 99% of people cannot be spot easily (how many kiters are welders/fabricators). Unlike some other parts it doesn't show any obvious signs of wear or use and should a spreader bar have a shelf life and what is this in hours/use?
Yes it is a Dakine Hammerhead. As stated they and the UK distributor were quick to reply and offer a warranty replacement (how much confidence do I have in this?) but my emailing them was not for this purpose and I suggested as above - how many failures are too many before they look at the manufacturing of these?
Therefore this is not a 'name and shame' thread but I want to find out if this has happened to others, or with other bars. I think if I have enough evidence then I'll forward it to Dakine. This is not me simply feeling aggrieved. I do think this is a serious safety issue and if there is any potential for this to fail in such a way then surely the manufacturer has to look at the design/quality control. I have googled and can't seem to find this issue with other brands so wondering if anyone out there has had it happen to them on any brand?
Yeah, my leg straps have gone the same way... they're only hanging on by a thread but they've been hanging on for months nowkitesurfboy wrote:my problems with the dakine fusion seat harness :
video on you tube :
https://www.youtube.com/watch?v=Q9rQSXsIY_U
they have to put a tag on it : use @ own risk
Users browsing this forum: andrzej351, andylc, apollo4000, Bing [Bot], Chriz76, Dirk, ham-er, i_love_storm, jannik, kitehub, Peter_Frank, SolarSet, Tony, Vivo3d, Windigo1, Yahoo [Bot] and 553 guests