Here you can exchange your experience and datas about your home build boards
-
alancFS13
- Rare Poster
- Posts: 6
- Joined: Fri Sep 24, 2010 8:49 pm
- Local Beach: The gorge is 4 hours away
- Favorite Beaches: The Gorge
- Style: Newbie still
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby alancFS13 » Fri Jun 21, 2013 12:39 am
I think the wood Zob is using is called Durakore. End grain balsa wood with thin hardwood veneer laminated on top and bottom. ATL Composites is the only place in the US i have seen it advertised. I think it might be less expensive to laminate some pieces up yourself.
-
zob
- Frequent Poster
- Posts: 476
- Joined: Tue Feb 24, 2009 1:43 pm
- Local Beach: Grado Pineta (IT), Fossalon (IT)
- Style: Freeride, strapless hooked-in
- Gear: FS S3 19m2 DLX, S3 CE 12m2 DLX & S4 8m2 DLX
Homemade Surf & Snow Boards
MBS Pro90
- Location: Iv.G.-Slovenia
-
Has thanked:
21 times
-
Been thanked:
3 times
-
Contact:
Postby zob » Fri Jun 21, 2013 5:11 am
I don't think it is Duracore, what I am using (couldn't find a decent pic of it). However this is a great find, because this kind of companies could use what I am using for their packing sheets. They usually don't know what they have or what it is made of. It is just packing material for them and a high valued ply for me. And they set the price, which is low
.
-
mattthieu
- Medium Poster
- Posts: 135
- Joined: Fri Apr 06, 2012 2:01 pm
- Local Beach: none so far
- Favorite Beaches: snowy fields around !!
- Style: snow kite ski for now !!
- Gear: some foils, and two new LEI for this summer !
- Brand Affiliation: none yet !!héhé
-
Has thanked:
0
-
Been thanked:
0
Postby mattthieu » Fri Jun 21, 2013 2:02 pm
if someone know where to find this ply in canada, or nothern america, let us know !! we are a few in the montreal area who could want some !
-
BWD
- Very Frequent Poster
- Posts: 3849
- Joined: Thu Jun 05, 2003 3:37 am
-
Has thanked:
2 times
-
Been thanked:
81 times
Postby BWD » Fri Jun 21, 2013 2:36 pm
It sounds like the wood zob is using is the cheap luaun used to wrap around palletized goods,
If so you can find it at loading docks, hopefully before they tear it off the crate. The problem with stuff like this I have seen is that the core, which can be 80-90% of thickness, can have voids or cracks in it. Also probably doesn't have waterproof glue. But it's light...
-
mattthieu
- Medium Poster
- Posts: 135
- Joined: Fri Apr 06, 2012 2:01 pm
- Local Beach: none so far
- Favorite Beaches: snowy fields around !!
- Style: snow kite ski for now !!
- Gear: some foils, and two new LEI for this summer !
- Brand Affiliation: none yet !!héhé
-
Has thanked:
0
-
Been thanked:
0
Postby mattthieu » Fri Jun 21, 2013 4:21 pm
well, waterproof glue is not issue due to the fact that i will wrap it entirely in glass and epoxy !
voids are and isue tho !
as for my rescearcs, blasa DIY core with or without stringers is the way to go ( but it needs tools and a balsa suply !!!)
-
zfennell
- Very Frequent Poster
- Posts: 975
- Joined: Wed Nov 20, 2002 1:00 am
- Brand Affiliation: None
- Location: rhode island
-
Has thanked:
0
-
Been thanked:
0
Postby zfennell » Fri Jun 21, 2013 5:35 pm
this is a bit off topic.
but i think you'll find this thread interesting.
its a low tech (compared to high tech) approach to the different fabrication techniques you've been considering.
http://www2.swaylocks.com/forums/low-te ... -sd-people
-
Johnny Rotten
- Very Frequent Poster
- Posts: 501
- Joined: Thu Dec 04, 2008 1:50 am
- Style: Surf and wake
- Gear: Vegas
Torch
Neo's
Hand made boards of pure excellence
- Brand Affiliation: None
- Location: No fixed address
-
Has thanked:
10 times
-
Been thanked:
29 times
Postby Johnny Rotten » Fri Jun 21, 2013 5:55 pm
Curious how the avisos hold up to the wave puntings during kiting compared to a sandwhich construction of similar weight.
If you make the sandwhich beam thick enough with enough dent resistance it should be fine. but in general large flat hollow carbon structures don't like to be jumped upon.
Figured a carbon skin honey comb core would be ultimate ideal, weighs nothing has good compression resistance and skins are fully supported...... it's just really expensive and not terribly good for shaping.
-
mattthieu
- Medium Poster
- Posts: 135
- Joined: Fri Apr 06, 2012 2:01 pm
- Local Beach: none so far
- Favorite Beaches: snowy fields around !!
- Style: snow kite ski for now !!
- Gear: some foils, and two new LEI for this summer !
- Brand Affiliation: none yet !!héhé
-
Has thanked:
0
-
Been thanked:
0
Postby mattthieu » Fri Jun 21, 2013 8:26 pm
i believe honeycomb would be the ultimate light weight to !
could we imagine some kind of easy to do wood honey comb something i could built in my garage ?
brainstorming there !!
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 149 guests