Here you can exchange your experience and datas about your home build boards
-
mattthieu
- Medium Poster
- Posts: 135
- Joined: Fri Apr 06, 2012 2:01 pm
- Local Beach: none so far
- Favorite Beaches: snowy fields around !!
- Style: snow kite ski for now !!
- Gear: some foils, and two new LEI for this summer !
- Brand Affiliation: none yet !!héhé
-
Has thanked:
0
-
Been thanked:
0
Postby mattthieu » Sat Jun 29, 2013 2:45 am
hi could anyone tell me what's the standard stance on a board ?
if i put 2 or 3 sets of inserts, what's the smalest and the farest ?
i stupidly sold my production board before noting the positions and all i have left are two rogue waves but theire custom made ( fore someone als that sold them to me ) so i'm not shure about they standardness !!
i know the holes are suposed to be 6 inch apart, ok, and the agle is also ok ( going to copy my rogues ) but, if one day i sell the board i like to have something like standard stance possibility .
-
BWD
- Very Frequent Poster
- Posts: 3849
- Joined: Thu Jun 05, 2003 3:37 am
-
Has thanked:
2 times
-
Been thanked:
81 times
Postby BWD » Sat Jun 29, 2013 5:43 am
roughly 21" to 25" depending a little on rider style etc.
-
edt
- Very Frequent Poster
- Posts: 7326
- Joined: Fri Jul 16, 2010 6:27 am
- Kiting since: 2010
- Local Beach: Michigan
- Gear: ride hard, no regrets
-
Has thanked:
533 times
-
Been thanked:
667 times
Postby edt » Sat Jun 29, 2013 2:05 pm
is there a standard? some straps / bindings mount from holes that are parallel, some are staggered, straps are often staggered but boots and some straps have mounting holes in line the old ones are 6.25 inches I think a few still are, most have gone to 6 inch separation but you also have a bunch of manufacturers going to sliding track systems. I dont know if there is any width standard at all. I think the track system that a lot of manufactures go with now have a bigger range than the old systems. Ladies boards are gonna be more narrow stance than a men's board too.
Just go with what you want that's my advice. If you sell it, well it's a custom job, I don't think 1 or 2 inches in stance will make or break a sale here.
-
mattthieu
- Medium Poster
- Posts: 135
- Joined: Fri Apr 06, 2012 2:01 pm
- Local Beach: none so far
- Favorite Beaches: snowy fields around !!
- Style: snow kite ski for now !!
- Gear: some foils, and two new LEI for this summer !
- Brand Affiliation: none yet !!héhé
-
Has thanked:
0
-
Been thanked:
0
Postby mattthieu » Sat Jun 29, 2013 4:50 pm
yep, i will end copy the rogue wave witch i find awesome comfy !
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 333 guests