edt wrote:flybykite wrote:It should work fine. I'll post it when it's finished. Still waiting on the lines to arrive.
Well if it does catch you can always grab 10 meter of 12 strand dyneema, splice it and that that one line will have 10 meters of regular kite line on it <--- this is how I would do it if I had a mess of q-powerline. You need to learn how to splice anyway if you are making your own bars, because you can splice your own leaders, bridle replacements, chicken lines etc. I really hate any kind of knots passing through the bar hole, so when I make a splice for my elastic flag out section I don't even use a zacher knot, I do a simple splice and sew it to lock it.
When I throw my QR I don't want it to work 95 times out of 100 I want it to work 100 out of 100. Saves a lot of grief because you don't have to sew back up a wrecked kite because you had to release it when the QR failed that one time. If there is a knot and it passes thru the bar hole, if you throw the QR a ton like I do, it will eventually catch on the bar might not be a high percentage but I had to learn this the hard way.
fdvj wrote:Why do you QR all the time?
fdvj wrote:I test mine regularly, but have had to use it properly about once a year in a situation, I thought from your post that you regularly QRed during kiting.
Since most kites depower enough when you drop the bar the only time you would need to QR is in a dangerous situation, and when this happens I expect my kite to be fully disabled not merely in a depowered setting and don't mind the fact that it is then unable to relaunch, as more than likely a pack down would be the best option anyway.
Kamikuza wrote:fdvj wrote:I IMO if you're not in control of the kite, you should be hovering over the QR.
Jinx wrote:i dont see the re ride being sacrificed on a front line flag, i teach on the LF envy and we are always releasing as part of the class and having students fix them selves up with little trouble
So I'm confused,
I'm building a bar. I don't have a bungee. In using one length of q line as the flag line. the stopper ball I'll make from nylon will be at the bottom of the swivel. A knot on the bar side will power the ball into the swivel, the rest of the line will feed through a ring on the side of the QR and have another ring attached to clip into. I'm unable to post my diagram again from page 1 from my phone. Please have a look at it and let me know if you see a design flaw.
I'm off to the kite spot now and no reception so it might be awhile before I reply.
Users browsing this forum: tirlibi and 19 guests