few years back the UK Epic dealer sent me a 9m screamer with the sliding ring on the bridal. Within 10 minuites it snapped resulting in a death looping kite in 35mph...
Silt, sand and salt get inside the rope and you have a smooth metal ring wearing away at it slowly. Maybe they work on really nice clean and warm Greek beaches but in cold wet climates you have a lot of sand sticking to the bridal ropes.
Normal pullys are fine, it is not the pully that is the problem, it's the rope! Most kite companies are running the wrong rope on their bridals. I recommend "Marlow 3.8mm formuline" and a standard 4mm ronstan orbit or Riley pully. After over 100 sessions you struggle to see where the pully has run.
I ride RRD Obsessions and the pully is a standard 4mm ronstan on 3mm dyneema... they are bad and snap after 100 or so sessions. Replaced all the inserts with "marlow formuline" and virtually no wear any more. Interestingly the company in the UK that seems to have virtually NO issues is Flexifoil, they use 4mm Metal Riley pullys and decent rope.
Users browsing this forum: Bing [Bot] and 19 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum