*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 19 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Kiteboard 131x42
PostPosted: Thu Oct 17, 2013 1:00 pm 
Offline
Rare Poster

Joined: Thu Sep 05, 2013 9:16 pm
Posts: 9
Hey, so I decided to do a kiteboard size of 131x42cm, then I want to try something bigger, about 165 cm in small wind. The core is made of poplar thickness at the edge of the middle 9 mm and 6 mm. Photo'll gradually next week laminates. So far, price boards zero zero nothing :)
Attachment:
IMAG0200.jpg
IMAG0200.jpg [ 666.19 KIB | Viewed 1384 times ]

Attachment:
IMAG0201.jpg
IMAG0201.jpg [ 625.62 KIB | Viewed 1384 times ]

Attachment:
IMAG0202.jpg
IMAG0202.jpg [ 615.51 KIB | Viewed 1384 times ]

Attachment:
IMAG0203.jpg
IMAG0203.jpg [ 671.17 KIB | Viewed 1384 times ]

Attachment:
IMAG0204.jpg
IMAG0204.jpg [ 713.5 KIB | Viewed 1384 times ]


{ SHARE_ON_FACEBOOK } { SHARE_ON_TWITTER } { SHARE_ON_ORKUT } { SHARE_ON_DIGG } { SHARE_ON_MYSPACE } { SHARE_ON_DELICIOUS }
Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Sat Oct 19, 2013 12:04 pm 
Offline
Rare Poster

Joined: Sat Sep 28, 2013 4:40 pm
Posts: 3
Looking good :D ! what is your lay up going to be?


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Sat Oct 19, 2013 8:17 pm 
Offline
Very Frequent Poster
User avatar

Joined: Sun Sep 04, 2011 5:37 pm
Posts: 1728
Something about working with wood has always made me feel good , be
it a board or a cabinet .

Your work looks Great !!

Bille


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Sun Oct 20, 2013 6:46 pm 
Offline
Rare Poster

Joined: Thu Sep 05, 2013 9:16 pm
Posts: 9
hello.
for zero-industries:
from the bottom
Diolen fabric - black 200 g/m2 twill 2/2
Glass fabric 102g/m2 canvas AEROGLASS
Glass fabric 80g/m2 AEROGLASS twill 2/2
The core of wood
Cross unidirectional carbon fiber grid connected 50K 125g/m2, 10 cm waist 2 times.
Glass fabric 80g/m2 AEROGLASS twill 2/2
Glass fabric 102g/m2 canvas AEROGLASS
Diolen fabric - black 200 g/m2 twill 2/2

the Bill:
The first time is quite an interrogation. este mam core doors on the size of 165x50 ...
it is a nice job and the rubbing resin, it makes me very tired :)


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Mon Oct 21, 2013 2:45 am 
Offline
Very Frequent Poster
User avatar

Joined: Sun Sep 04, 2011 5:37 pm
Posts: 1728
Raslikk wrote:

...

the Bill:
The first time is quite an interrogation. este mam core doors on the size of 165x50 ...
it is a nice job and the rubbing resin, it makes me very tired :)


YES -- but the Well worth the effort for future projects : :thumb:
It gets Easier , after Ya done a few ;
just "Keep" That Passion going !!!

Bille


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Mon Oct 21, 2013 8:44 am 
Offline
Frequent Poster
User avatar

Joined: Mon Jul 01, 2013 7:16 am
Posts: 283
Location: Perth, Australia
Raslikk wrote:
hello.
for zero-industries:
from the bottom
Diolen fabric - black 200 g/m2 twill 2/2
Glass fabric 102g/m2 canvas AEROGLASS
Glass fabric 80g/m2 AEROGLASS twill 2/2
The core of wood
Cross unidirectional carbon fiber grid connected 50K 125g/m2, 10 cm waist 2 times.
Glass fabric 80g/m2 AEROGLASS twill 2/2
Glass fabric 102g/m2 canvas AEROGLASS
Diolen fabric - black 200 g/m2 twill 2/2

the Bill:
The first time is quite an interrogation. este mam core doors on the size of 165x50 ...
it is a nice job and the rubbing resin, it makes me very tired :)



Is this a PU for the rails? Or epoxy?

Good work.


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Mon Oct 21, 2013 4:32 pm 
Offline
Frequent Poster

Joined: Mon Sep 03, 2012 12:36 pm
Posts: 429
Downunder - i meant to post this on board builders ages ago but forgot, a while back on one of the threads on board builders i recall you questioning the big companies lay-up qualities and whether they get imperfections and wether they hide them underneath the graphics... well North do! I was repairing a North TT, doing a rail delam and noticed amongst their 'blocky' top graphic were a couple of clear squares in the graphic that allow you to see the wooden core....but what it actually showed you is the tonnes of imperfections in the glass.... uneven weaves and dry spots. Don't know how long the guys had it or how much abuse he gives em but it's in a real state...doesn't look like a very well made board to me at all.


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Mon Oct 21, 2013 7:00 pm 
Offline
Rare Poster

Joined: Thu Sep 05, 2013 9:16 pm
Posts: 9
downunder:
It will be epoxy.

sijandy:
I do not know if I understand you well, but what you do not do so alone as you want. It's like when you let build a house from the company and then find out gross deficiencies :) and he would've stood by too different, and most importantly know where the gaps are :)

otherwise I did the first layer of epoxy on trial and there have bubbles, so it must be ground and try it again, that's exactly what I was afraid of: (
how much do you curl back boards after removing from the mold?? Thanks for the reply


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Mon Oct 21, 2013 7:23 pm 
Offline
Frequent Poster

Joined: Mon Sep 03, 2012 12:36 pm
Posts: 429
Raslikk wrote:
downunder:
It will be epoxy.

sijandy:
I do not know if I understand you well, but what you do not do so alone as you want. It's like when you let build a house from the company and then find out gross deficiencies :) and he would've stood by too different, and most importantly know where the gaps are :)


Hey, yeah i'm not sure you understood me... no worries, i was just referring back to a question from Downunder on a different forum. It's called BoardBuilders i think - google it, some useful info and tips for board making.

Quote:
how much do you curl back boards after removing from the mold??


...depends on two main things, what material your using for your core and how much glass. I use Palawnia wood core, spring back for me tends to be in the region of 35-50% give or take. I've learnt that rather than try and fight it is too anticipate the spring back and adjust your rocker table accordingly. ie if you want a final rocker of 40mm then set the table to 80mm.


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Tue Oct 22, 2013 2:29 am 
Offline
Frequent Poster
User avatar

Joined: Mon Jul 01, 2013 7:16 am
Posts: 283
Location: Perth, Australia
sijandy wrote:
Downunder - i meant to post this on board builders ages ago but forgot, a while back on one of the threads on board builders i recall you questioning the big companies lay-up qualities and whether they get imperfections and wether they hide them underneath the graphics... well North do! I was repairing a North TT, doing a rail delam and noticed amongst their 'blocky' top graphic were a couple of clear squares in the graphic that allow you to see the wooden core....but what it actually showed you is the tonnes of imperfections in the glass.... uneven weaves and dry spots. Don't know how long the guys had it or how much abuse he gives em but it's in a real state...doesn't look like a very well made board to me at all.


True. And paying a top $$$ for this boards.

If they all used a clear topsheet, many wouldn't sell...


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 19 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: mattthieu and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group