Here you can exchange your experience and datas about your home build boards
-
Raslikk
- Rare Poster
- Posts: 15
- Joined: Thu Sep 05, 2013 9:16 pm
- Gear: Flysurfer
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Raslikk » Tue Oct 22, 2013 4:52 pm
sijandy:
oki thanks for the reply, I have no makeup of the post you know. So we'll see, it's a board for the young. Otherwise, the core is poplar. After Paulownia I also watched but here in CZ can not get it.
boys and a clear coat here perhaps este seen on board, only the Nobile 2HD are small pieces and there is wood ok.
-
Raslikk
- Rare Poster
- Posts: 15
- Joined: Thu Sep 05, 2013 9:16 pm
- Gear: Flysurfer
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Raslikk » Sun Oct 27, 2013 5:18 pm
Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... some photos and perhaps better next time
-
Bille
- Very Frequent Poster
- Posts: 4023
- Joined: Sun Sep 04, 2011 5:37 pm
- Local Beach: Lake Mohave
- Gear: Ozone Edge
- Brand Affiliation: Barz Optics
Jaybar Dynabar V7
-
Has thanked:
252 times
-
Been thanked:
188 times
Postby Bille » Sun Oct 27, 2013 6:30 pm
Raslikk wrote:Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ...
Unclear what you are intending here :
Did you WANT -- 6 cm deflection, and got 2.8 cm instead ; or other ... ?
Bille
-
Raslikk
- Rare Poster
- Posts: 15
- Joined: Thu Sep 05, 2013 9:16 pm
- Gear: Flysurfer
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Raslikk » Sun Oct 27, 2013 7:04 pm
Bille wrote:Raslikk wrote:Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ...
Unclear what you are intending here :
Did you WANT -- 6 cm deflection, and got 2.8 cm instead ; or other ... ?
Bille
Yes of 6 cm 2.8 cm. Next time ladies around the hill more fabric. It was my first board ....
-
downunder
- Very Frequent Poster
- Posts: 2814
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
160 times
Postby downunder » Mon Oct 28, 2013 2:58 am
Raslikk wrote:Bille wrote:Raslikk wrote:
Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ...
Next time ladies around the hill more fabric.
Huh, someone is using the Google translator:) Raslikk, this in
bold is difficult to understand even though I'm from the EU.
Now, about the board, it's called a spring back (6cm to 2.8cm), and yes, you got > 50%!!!
Your board looks heavy. Very good for a first one though!
-
Raslikk
- Rare Poster
- Posts: 15
- Joined: Thu Sep 05, 2013 9:16 pm
- Gear: Flysurfer
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Raslikk » Tue Oct 29, 2013 2:23 pm
Hello, thereabouts that all do not understand therefore I'm install new translator so perhaps it will be better:) St. in one's own line boards just so really about 50% and tomatoes stoped:( is that a damage, because by now board don't try out:( At our place is already cold:)
Next time will result better, largely perhaps thereabouts I know what I'm did badly, so we'll see.
-
Bille
- Very Frequent Poster
- Posts: 4023
- Joined: Sun Sep 04, 2011 5:37 pm
- Local Beach: Lake Mohave
- Gear: Ozone Edge
- Brand Affiliation: Barz Optics
Jaybar Dynabar V7
-
Has thanked:
252 times
-
Been thanked:
188 times
Postby Bille » Tue Oct 29, 2013 4:57 pm
Raslikk wrote:
...
Next time will result better, largely perhaps thereabouts I know what I'm did badly, so we'll see.
It's always GOOD when you Learn something !
It would have bin Easy to make the board Stiffer, by adding a little
carbon Uni ; Hard to make them more flexible unless you start over.
But your wood-work looks AWESOME !!!!!!!!!!
A bit thinner on the tails, and a bit Less glass to start with ; add more
if needed on the next one.
Bille
-
Raslikk
- Rare Poster
- Posts: 15
- Joined: Thu Sep 05, 2013 9:16 pm
- Gear: Flysurfer
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Raslikk » Tue Oct 29, 2013 5:22 pm
Bille:
Carboniferous period at that is, then only on top of, from below I'm didn't arrange. but perhaps little and or be too hard core, we'll see next time how so will go against. Ted eye do see photo, kernel already is ready, is that a board 165x50. Kernel is less than 1 cm. So it radial I'll do from Carboniferous period, but if does anyone have some idea, like him dozer:)
-
zob
- Frequent Poster
- Posts: 476
- Joined: Tue Feb 24, 2009 1:43 pm
- Local Beach: Grado Pineta (IT), Fossalon (IT)
- Style: Freeride, strapless hooked-in
- Gear: FS S3 19m2 DLX, S3 CE 12m2 DLX & S4 8m2 DLX
Homemade Surf & Snow Boards
MBS Pro90
- Location: Iv.G.-Slovenia
-
Has thanked:
21 times
-
Been thanked:
3 times
-
Contact:
Postby zob » Tue Nov 05, 2013 8:01 pm
Nope, the new translator doesn't work either.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 134 guests