*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 17 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Kite knives, anyone tried the leatherman Z Rex?
PostPosted: Sun Dec 29, 2013 7:54 am 
Offline
Frequent Poster

Joined: Sat Feb 21, 2004 4:34 am
Posts: 306
Location: SoCal
Just ordered a Gerber GDC Hook Knife http://www.gerbergear.com/Essentials/Knives/Hook-Knife_31-001695

Hasn't arrived yet. So I'm not sure how it's going to work out.


Top
Profile
 Post subject: Re: Kite knives, anyone tried the leatherman Z Rex?
PostPosted: Sun Jan 05, 2014 3:26 am 
Offline
Frequent Poster

Joined: Sat Feb 21, 2004 4:34 am
Posts: 306
Location: SoCal
The GDC knife arrived. Some of the reviews of the hook knife on Amazon indicated that it can fall out of it's protective sheath. So I wrapped a small O-Ring around the blade and sheath. The O-Ring holds it in and should keep it from coming loose. It does not require excessive force to remove the blade. I tested and can easily pull it out with one hand. I wear an impact vest most days so I've mounted the knife to the zipper. Haven't been out with it yet.


Attachments:
100_2704.JPG
100_2704.JPG [ 1.69 MIB | Viewed 668 times ]
Top
Profile
 Post subject: Re: Kite knives, anyone tried the leatherman Z Rex?
PostPosted: Sun Jan 05, 2014 4:07 am 
Offline
Very Frequent Poster
User avatar

Joined: Mon Mar 16, 2009 4:35 pm
Posts: 1549
Location: Southwestern Ontario
BiteMe wrote:
The GDC knife arrived. Some of the reviews of the hook knife on Amazon indicated that it can fall out of it's protective sheath. So I wrapped a small O-Ring around the blade and sheath. The O-Ring holds it in and should keep it from coming loose. It does not require excessive force to remove the blade. I tested and can easily pull it out with one hand. I wear an impact vest most days so I've mounted the knife to the zipper. Haven't been out with it yet.


Nice job, I had to really look to,see where you stashed it. Please keep us informed as you test it. Hope you never have to use it!


Top
Profile
 Post subject: Re: Kite knives, anyone tried the leatherman Z Rex?
PostPosted: Sun Jan 05, 2014 10:41 pm 
Offline
Very Frequent Poster

Joined: Sat Jan 10, 2004 11:53 pm
Posts: 916
There was a great deal of discussion on this KF thread: Hook Knives...don't bet your life on them!

viewtopic.php?f=1&t=2343820

I would be interested in knowing the results of a comparison test, that you could easily do. The test would involve taking a piece of old kite line into a kite shop that sells the newest model of the DaKine double-bladed hook knife. Have a person hold the kite line stretched out firmly, with their 2 hands. Then, first cut the string with the knife under discussion, and then do the same thing with the DaKine hook knife. Let us know which knife cut the line with the least amount of force exerted.

Also, post the result on the above mentioned thread. It is nice to keep all the data in one thread, for future reference.


Top
Profile
 Post subject: Re: Kite knives, anyone tried the leatherman Z Rex?
PostPosted: Sun Jan 05, 2014 11:59 pm 
Offline
Very Frequent Poster
User avatar

Joined: Mon Mar 16, 2009 4:35 pm
Posts: 1549
Location: Southwestern Ontario
tomatkins wrote:
There was a great deal of discussion on this KF thread: Hook Knives...don't bet your life on them!

viewtopic.php?f=1&t=2343820

I would be interested in knowing the results of a comparison test, that you could easily do. The test would involve taking a piece of old kite line into a kite shop that sells the newest model of the DaKine double-bladed hook knife. Have a person hold the kite line stretched out firmly, with their 2 hands. Then, first cut the string with the knife under discussion, and then do the same thing with the DaKine hook knife. Let us know which knife cut the line with the least amount of force exerted.

Also, post the result on the above mentioned thread. It is nice to keep all the data in one thread, for future reference.


I've done this with the knife I posted above against a Dakine... I tested it on kite line and 3/8 Amsteel. The Dakine would cut the kite line but you had to seesaw it a bit while with the benchmade it was like taking a razor to a thread.... The Amsteel required some pull with the benchmade but not so much you couldn't manage it ... The Dakine was not suited for cutting 3/8 Amsteel


Top
Profile
 Post subject: Re: Kite knives, anyone tried the leatherman Z Rex?
PostPosted: Mon Jan 06, 2014 6:30 am 
Offline
Very Frequent Poster

Joined: Sat Jan 10, 2004 11:53 pm
Posts: 916
Laughingman wrote:
tomatkins wrote:
There was a great deal of discussion on this KF thread: Hook Knives...don't bet your life on them!

viewtopic.php?f=1&t=2343820

I would be interested in knowing the results of a comparison test, that you could easily do. The test would involve taking a piece of old kite line into a kite shop that sells the newest model of the DaKine double-bladed hook knife. Have a person hold the kite line stretched out firmly, with their 2 hands. Then, first cut the string with the knife under discussion, and then do the same thing with the DaKine hook knife. Let us know which knife cut the line with the least amount of force exerted.

Also, post the result on the above mentioned thread. It is nice to keep all the data in one thread, for future reference.


I've done this with the knife I posted above against a Dakine... I tested it on kite line and 3/8 Amsteel. The Dakine would cut the kite line but you had to seesaw it a bit while with the benchmade it was like taking a razor to a thread.... The Amsteel required some pull with the benchmade but not so much you couldn't manage it ... The Dakine was not suited for cutting 3/8 Amsteel



That sounds like the second generation DaKine knife with the 2 blades which each had a double bevel. The newest model (maybe 2 or three years old) has 2 blades and each blade has a single bevel. When I did the test on kite line, there was no need for any sawing motion... just a tiny tug on the knife was needed.


Top
Profile
 Post subject: Re: Kite knives, anyone tried the leatherman Z Rex?
PostPosted: Fri Jan 17, 2014 5:49 am 
Offline
Very Frequent Poster

Joined: Fri Oct 21, 2005 11:35 am
Posts: 1695
BiteMe wrote:
The GDC knife arrived. ....


I bought one of these knives to attach to my paraglider harness. I would not recommend it for kiteboarding. The curve of the blade is too small. It takes a lot of force to cut through a kite line.

There is no slicing action when cutting. All that is working for you is the sharpness of the blade. It is better than nothing, but a purpose built kitesurfing knife is much better.


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 17 posts ]  Go to page Previous  1, 2

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot], robg and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group