Forum for kitesurfers
-
BreezeSleaze
- Rare Poster
- Posts: 20
- Joined: Sat Jan 04, 2014 12:28 am
- Gear: Slingshot RPM quiver
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby BreezeSleaze » Sat Feb 08, 2014 2:53 am
Anybody have any tips or tricks how to mount a go pro to a split strut kite?
-
Al_Kiter
- Frequent Poster
- Posts: 216
- Joined: Mon Jul 28, 2003 12:47 pm
- Local Beach: Guincho
- Style: Surf
- Gear: Wave SST 9m, 7m, 5m
Airush Converse 6'1'', FW EVO 5'3''
- Brand Affiliation: None
- Location: Cascais, Portugal
-
Has thanked:
0
-
Been thanked:
3 times
Postby Al_Kiter » Mon Feb 10, 2014 12:50 am
I've been thinking about this too and sometime soon i'm gonna test this idea:
measure the diameter of the strut you want to attach the camera to and then buy a pvc pipe with a slightly smaller diameter than the strut's. Then cut it in a fashion similar to this:
you can then attach a gopro mount to the middle part of the pvc like for instance a tripod mount, or something fancier that allows the camera to rotate like some guys are selling on the internet.
In any case, as i said this is just a rough idea. If you try it, make sure to secure the camera with a leash to the pump leash attachment.
-
edt
- Very Frequent Poster
- Posts: 7329
- Joined: Fri Jul 16, 2010 6:27 am
- Kiting since: 2010
- Local Beach: Michigan
- Gear: ride hard, no regrets
-
Has thanked:
533 times
-
Been thanked:
668 times
Postby edt » Mon Feb 10, 2014 1:14 am
BreezeSleaze wrote:Anybody have any tips or tricks how to mount a go pro to a split strut kite?
hey breeze any reason you can't use a line mount? I'm new to this gopro thing myself.
-
Kithib
- Rare Poster
- Posts: 46
- Joined: Thu Feb 09, 2012 8:19 pm
- Local Beach: Pine harbour
- Favorite Beaches: Muriwai, Orewa, Port Waikato
- Gear: Ozone
- Brand Affiliation: Ozone
- Location: Auckland
-
Has thanked:
0
-
Been thanked:
0
Postby Kithib » Mon Feb 10, 2014 5:18 am
If the strut is not stiched you can use the helmet mount accessory.
-
stringy
- Medium Poster
- Posts: 180
- Joined: Sat Jan 31, 2009 4:35 pm
- Local Beach: seattle, wa
- Style: freeriding
- Brand Affiliation: None
- Location: seattle, wa
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby stringy » Tue Feb 11, 2014 11:38 pm
gopro on a kite can give a pretty cool perspective especially if you're riding in a unique spot where you just can't understand it unless you get that wide angle overhead shot.
anyhow I was tinkering with a new way of mounting a camera to my strut. I always used a ipod armband but was looking for something that would go on easier. always a hassle trying to feed the velcro around the strut and then trying to tighten it.
I decided to try a tube of 3" diameter polycarbonate. the wall is pretty thin so not sure how it will work yet. what is cool is once I cut through it the material springs in to form a smaller diameter. I don't see why this system couldn't work on a split strut system,
I haven't used this setup yet, but before I do I will line it with some rubber sheet to keep it from sliding and moving around.
-
Attachments
-
-
-
XtremeBigAir
- Rare Poster
- Posts: 25
- Joined: Fri Oct 12, 2012 10:22 pm
- Local Beach: Pismo Beach
- Favorite Beaches: Pismo Beach
- Style: all style
- Gear: best
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby XtremeBigAir » Tue Feb 11, 2014 11:43 pm
-
Attachments
-
- PKS_strut_mount_gopro-1.jpg (98.66 KiB) Viewed 2342 times
-
dyyylan
- Very Frequent Poster
- Posts: 1754
- Joined: Sun Jan 02, 2011 11:45 pm
- Gear: N/A
-
Has thanked:
0
-
Been thanked:
1 time
Postby dyyylan » Wed Feb 12, 2014 3:17 am
The guy is asking about split strut kites...
That means the canopy is sewn on either side to the strut, there is no way to wrap something entirely around it.
-
robertovillate
- Very Frequent Poster
- Posts: 1508
- Joined: Wed Aug 14, 2002 1:00 am
- Brand Affiliation: None
- Location: PASA Level III Instructor FL- OBX - MI - the world
-
Has thanked:
0
-
Been thanked:
0
Postby robertovillate » Wed Feb 12, 2014 5:30 am
Just get different kites.
Problem solved.
-
MattyM
- Medium Poster
- Posts: 105
- Joined: Mon Apr 07, 2014 5:29 pm
- Gear: Core, F-One, Moses
- Brand Affiliation: None
-
Has thanked:
10 times
-
Been thanked:
23 times
-
Contact:
Postby MattyM » Tue Oct 07, 2014 11:48 am
Return to “Kitesurfing”
Who is online
Users browsing this forum: Aleza, andylc, BillyGoatGruff, Bing [Bot], Blackened, bshmng, Carlos_C, Cheoz0r86, chidism, Da Yoda, fishyface, Flyingseb, i_love_storm, jjm, MKM, notamondayperson, Onda, Peter_Frank, SolarSet, tilmann, Vivo3d and 404 guests